Jump to content
SAU Community

Recommended Posts

Hi,

Im new to the whole skyline thing :). I have been looking to buy a new car (was looking at a brand new accord euro). However I have been offered a skyline to buy and over the last couple of days i have been researching them on the net and have gotten quite interested in buying one. I love driving and the price of the skyline (particularly for it performance appeals to me).

Anyway not knowing much when i was offered the car i thought "wow how can such a good car be so cheap" having always thought skylines where more expensive. However a few of my friends think that the price they are asking is to much.

Who better to ask than the experts :D.

It is a: 1996 Skyline R33 GTS 2.5T (Series II) with a GTR body kit, 3 inch s/steel exhaust, Bilstein Shocks, Lowered GTR Springs, 17" Mags with New Low profile tyres. 100K on the clock.

Those details are straight from what the owner told me so if i have stuffed any up im sorry :(.

Anyway what would be a fair price to apy for this????

THanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/31369-newbie-after-a-little-advice/
Share on other sites

Not knowing the condition of the body .... or whether its all mechanically peachy .... i say about $19K - $22K would be fair for it.

My car is basically the same except SI ... and i bought that for $20K 1.5 years ago :)

Lauren

P.S - Driven a Honda Accord :slap: what were you thinking???

take the Skyline for a test drive .... then test drive the Accord .... totally different cars! Accord is ok if your planning on having a family and want a place to pu tthe kids in the back to drive to church every sunday :)

yeh id say around $22k would b reasonable some modified series2's sell for around the late 20's but this one isnt that modified and has fairly high k's

and DONT forget that skylines may seem cheap but trust me, when you add up all the other costs such as insurance and running costs they can become expensive!

a friend of mine thought the same thing but when all the final costs were added up he changed his mind and bought a new commodore instead (yeah poor choice :) )

Its selling for $20,500 ono. I know i can get it for 20 but would hope for 19-19,500.

So sounds as if that is reasonable. Considering i was gonna buy a new car the extra cost arent too bad. I have a quote on insurance for around $1300pa which isnt too bad i dont think.

Now the frightening thing is where do I start with the mods. :)

Also i havent driven a Skyline yet... i am assured that will seal the deal :D

Hi,

It is a:  1996 Skyline R33 GTS 2.5T (Series II) with a GTR body kit, 3 inch s/steel exhaust, Bilstein Shocks, Lowered GTR Springs, 17" Mags with New Low profile tyres. 100K on the clock.  

short answer - about 18k for an auto or 20 for a manual.

long answer - at 100k, most cars, and especially jap turbos require a timing belt change. this is a glaring omission from his details. this can cost upwards of 1k, so be mighty careful.

you probably also want to find out how far back the exhaust goes - i.e. cat back or turbo back. this isnt a big deal, as the cost of fitting it later will be small, but it does give you an indication of what the power output SHOULD be.

Bilstein shocks = coil overs or single shocks?

what brand are the mags? aus or japanese? what state is the kit in, cracks etc.

these are all things which you need to ask them and yourself.

you may also wish to get a leak down test done - a lot of people here have used them as an indicator for what sort of life the engine has had.

finally, be aware that the aussie dollar is VERY strong against the yen at the moment. private importing is a personal question, but it may be worth asking whether waiting for 3 months is worth the (up to) $3,000 that you might save.

I bought my car for $20, on the road a year a go. I could probably buy the same car now for $18 even though the import scheme is now more expensive..

and YES, the drive will sell you. welome to SAUWA.

oh my god buy it

if you dont i am going to go buy it

seriously a great condition series II is worth alot more than western australians sell them for.

its because there are so many series I's its hard to justify the extra that the series II's are worth

but ask any series II owner and they will gladly pay that much more again cos the car is so different yet the same in most regards. confused yet

i would definately take it but only if they agree to a compression test and general look over at a garage of your choice.....sst or hyperdrive etc etc

If you or the car live NOR we can do an inspection which is as good as the RAC ( probably better cos we specialise in them ) and give an unbiased opinion.

Contact us by phone if you wish to book in a time.

Cheers

ken

An inspection from someone like Hyperdrive (kens team) will be hugely beneficial over RAC. RAC really havent got it together with the imports yet, last time i checked anyway.

Definately get it inspected - if it works out well, go for it..Series II look much nicer than those oceanliner series I's ;)

(if it doesnt work out theres an r32 here for sale :( )

If you or the car live NOR we can do an inspection which is as good as the RAC ( probably better cos we specialise in them ) and give an unbiased opinion.

Contact us by phone if you wish to book in a time.

Cheers

ken

Thanks heaps guys. So far your forum has been very helpful.

Unfortunately the car is down south so getting it to perth for an inspection isnt possible. Are there any companies in bunbury who know what they are doing ;). Otherwise ill have to trust the RAC.

Also thanks for the tips on what to look for when buying... very helpful. Particularly the timing belt - if it isnt done guess ill just have to factor that into the bargaining (whats the usual cost for this btw??). If there are any other things i should look for i will be very grateful.

Thanks again... i look forward to posting messages when im a proud owner :(.

the timing belt itself isnt that expensive - i think you can get it done for about $500.

but there's a extra-major-massive service that should go with it - which could easily set you back 900 to 1200 depending on who does it.

I will try and find a link to what is entailed.

An inspection from someone like Hyperdrive (kens team) will be hugely beneficial over RAC. RAC really havent got it together with the imports yet, last time i checked anyway.  

Definately get it inspected - if it works out well, go for it..Series II look much nicer than those oceanliner series I's ;)

(if it doesnt work out theres an r32 here for sale :( )

Ahh, actually that's Ken & Glenn's team. :Bang:

http://www.skylinesaustralia.com/forums/sh...=service+timing

this link has a good list on what's involved:

http://www.skylinesaustralia.com/forums/sh...=service+timing

there used to be a thread in the WA section, but I can't find it. I can't remember which company it was - but there was a link to their list and details on what is involved.

as you can see, it's a pretty major service - not just a timing belt change.

best to probably ring a few (reputable) shops and ask for a few quotes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...