Jump to content
SAU Community

Recommended Posts

Hi,

I hope I don't annoy too many people. I have searched through a few threads now and I haven't been able to get a clear answer. I want to know what offset of wheel looks good on a R32 GTR. I DON'T LIKE THE SUNKEN LOOK.

-Is 22 ok for a GTR or is that more for the R32 GTST?

-Can anyone give me a list of good offsets to be used. (I don't want to use spacers)

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/313971-off-sets-im-confused/
Share on other sites

Hi,

I hope I don't annoy too many people. I have searched through a few threads now and I haven't been able to get a clear answer. I want to know what offset of wheel looks good on a R32 GTR. I DON'T LIKE THE SUNKEN LOOK.

-Is 22 ok for a GTR or is that more for the R32 GTST?

-Can anyone give me a list of good offsets to be used. (I don't want to use spacers)

Thanks in advance.

Depends on the width of the rim big guy. 22 offset on a 9" rim is different to 22 offset on a 10" rim.

For what its worth, I run 18x10" +20 offset. A +22 offset on a 10" rim would put the outside of the rim 2mm further under the guard. (and yep, a 10" rim with +22 offset on a GT-R would look tuff)

yes it depends on the width of the rim...

+22 is an acceptable, medioka fitment for GTR's... its a tough fitment for gtst's though.. for a really flush/slightly outside the guards fit on a GTR, look around for something around +15.

i have a set of 17x9 + 25 and 17x9.5 + 25.. even though its only 12mm wider.. the 9.5's sit much further outside the guards than the 9's do.. i could pull off the 9's even with wide tyres, whereas the 9.5s i need stretched tyres to fit.

offset is not that hard to work out... its only when you throw different widths into the mix that it becomes difficult.

i wouldnt look at anything smaller than 9.5" and with more offset than +20.

and remember that wheel widths are measured bead to bead... not edge to edge.. so a 9.5" rim is usually 10" edge to edge... but that all depends on the brand of wheel and the type of lip they use.

Hi,

Thanks to everyone who has posted in.

Will the eneki rpo1 17X9 22 sit flush with the guard. I don't want a rim that sits outside the guard. If these are no good can somebody recomend a forged alloy rim that can house 6 pot calipers and sit flush with the guards.

Thanks

Hi,

Thanks to everyone who has posted in.

Will the eneki rpo1 17X9 22 sit flush with the guard. I don't want a rim that sits outside the guard. If these are no good can somebody recomend a forged alloy rim that can house 6 pot calipers and sit flush with the guards.

Thanks

A 17*9" +22 rim is a very good fit for an R32 GTR. I have that size on mine. They are CE28's which clear an F40 calliper on a 324 rotor.

The thing you have to understand is that the amount of camber you run will have a big impact on how flush the top of the tyre sits to the guard. You can make just about anything fit if you run stupid amounts of negative camber.

Also it is common for the rear guard lip to contact the tyre if the ride height is low - a 255/40 rear tyre in a Briudgestone RE55 will usually do so.

As far as calliper clearance unless you can get a diagram of the wheel/calliper the only way to confirm it is to see it. Enkei are usually pretty good on the clearance but it can depend on the calliper alot too.

post-5134-1270092990_thumb.jpg

17X9 +22 will look fine. they certainly won't look 'sunken' (lol) at all. ekei's make a good wheel and like djr81 said they generally (in their racing type wheels) have quite generous calliper clearance too.

I have 18x10+13 and I am having troubles making them fit properlly with guard issues but will look super tuff once I can get them to fit on my 32-R.

18x10+20 would be the perfect offset with minimal headf**ks lol

I have 18x10+13 and I am having troubles making them fit properlly with guard issues but will look super tuff once I can get them to fit on my 32-R.

18x10+20 would be the perfect offset with minimal headf**ks lol

At some stage a historian will be able to pin point the exact time owning a GTR turned into a pissing competition about how much rim/tyre/offset could be shoved under the guards. :(

You are having troubles fitting the rims because they have too much offset & are an half an inch to an inch wider than they need to be.

Not having a go at you but I get sick of people trying to talk up wheel tyre sizes to the detriment of suspension geometry & handling - not to mention tyre life.

17X9 +22 will look fine. they certainly won't look 'sunken' (lol) at all. ekei's make a good wheel and like djr81 said they generally (in their racing type wheels) have quite generous calliper clearance too.

what he said :worship:

handy tool for this purpose...

http://www.1010tires.com/WheelOffsetCalculator.asp

Edited by WHITE R32
Hi,

I hope I don't annoy too many people. I have searched through a few threads now and I haven't been able to get a clear answer. I want to know what offset of wheel looks good on a R32 GTR. I DON'T LIKE THE SUNKEN LOOK.

-Is 22 ok for a GTR or is that more for the R32 GTST?

-Can anyone give me a list of good offsets to be used. (I don't want to use spacers)

Thanks in advance.

your not the only one. i been searching and reading pages and pages. still not with it. even with the online tools. lol. is the number higher meaning it sticks out more? or vice versa? :S same as you, i dont want the wheels to sit in, but yet again, dont want the stupid vip look.

i been looking for wheels online, but i think im just gonna have to find a tyre shop that already knows whats a good fitment.

trying to source 18 or 19" on a r33 gtst.

A 17*9" +22 rim is a very good fit for an R32 GTR. I have that size on mine. They are CE28's which clear an F40 calliper on a 324 rotor.

The thing you have to understand is that the amount of camber you run will have a big impact on how flush the top of the tyre sits to the guard. You can make just about anything fit if you run stupid amounts of negative camber.

Also it is common for the rear guard lip to contact the tyre if the ride height is low - a 255/40 rear tyre in a Briudgestone RE55 will usually do so.

As far as calliper clearance unless you can get a diagram of the wheel/calliper the only way to confirm it is to see it. Enkei are usually pretty good on the clearance but it can depend on the calliper alot too.

not having a go at you... as your gtr looks very tidy... but i would consider that sunken... not flush.. if that is the fit the OP is after... than all good and well... but flush is only achievable with stretched tyres, i know you are anti stretched tyres, but i approve of the stretch... so it is up to the OP.. if he wants a fitment like yours, then +22 will be fine.. but if he considers that sunken, then he'll need something like +15ish... with some 235's fitted with some stretch.

not having a go at you... as your gtr looks very tidy... but i would consider that sunken... not flush.. if that is the fit the OP is after... than all good and well... but flush is only achievable with stretched tyres, i know you are anti stretched tyres, but i approve of the stretch... so it is up to the OP.. if he wants a fitment like yours, then +22 will be fine.. but if he considers that sunken, then he'll need something like +15ish... with some 235's fitted with some stretch.

Well if you have a closer look you will notice the front end is running alot of -ve camber plus a bunch of other non standard bits. About four degrees. I could easilly make it look more "flush" by winding some out.

Which was my point, really. You need to know both the wheel/tyre size, the ride height & the amount of -ve camber. They are all inter related.

Best thing to do is to try a rim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...