Jump to content
SAU Community

Recommended Posts

Are there any disadvantages to running a 80mm throttle body on a greddy manifold on a rb25 if your "only" making about 250rwkws?

Disadvantage would be light throttle modulation would be some what crappy.

  • 5 months later...
  • 2 months later...

hey all,

i have my plazmaman etc on my r32 rb25.

now i cant for the life of my find injectors + rail to fit under it.

i run e85 and ~350rwkw

im running stock hiflowed injectors.

now i wanna get rid of these for top feed ~1000cc but cant find any.

i have come to the conclusion that changing to a greddy is prolly the best option.

unless anyone out there has found injectors to fit?

if i did change to greddy do stock rail + injectors fit?

hey all,

i have my plazmaman etc on my r32 rb25.

now i cant for the life of my find injectors + rail to fit under it.

i run e85 and ~350rwkw

im running stock hiflowed injectors.

now i wanna get rid of these for top feed ~1000cc but cant find any.

i have come to the conclusion that changing to a greddy is prolly the best option.

unless anyone out there has found injectors to fit?

if i did change to greddy do stock rail + injectors fit?

the short id 1000 dont clear?

my car has a plazmaman plennum on it making 470rwhp and the midrange response feels so much better than when I had a greddy plannum, unfortunately I don't like the look of plazmaman plennums. Want to chage but I'll put up with the uglyness for better response and mid range.

I use a genuine Greddy coupled to a 30 mil phonelic spacer. The added runner length fixes up the low midrange and purely from a looks point of view the greddy shits all over the plazmaman.

The tuner also commented on how even my cylinder temperatures were as well. Even distribution will do that.

the short id 1000 dont clear?

didnt know the id1000 came as a shorter unit?

what rail do they take, as i found the rail is the thing that fouls.

and yeh im gutted if i have to loose response etc, but my fuel system is pushing it.

Anyone else running plazmaman plenum bothered to pull their plugs and see if they are or not even

Also, anyone running anything other then the plasmaman throttle or std throttle body?

running a CPC plenum and all my plugs are the same when i removed them.

would be keen to see a dyno comparison with stock vs FFP.

if anyone wants to give me a r34 gtt neo standard plenum ill gladly test :D

running a CPC plenum and all my plugs are the same when i removed them.

would be keen to see a dyno comparison with stock vs FFP.

if anyone wants to give me a r34 gtt neo standard plenum ill gladly test :D

I can lend you one.

Clean out your Pm box. I can't Pm you

running a CPC plenum and all my plugs are the same when i removed them.

would be keen to see a dyno comparison with stock vs FFP.

if anyone wants to give me a r34 gtt neo standard plenum ill gladly test :D

Pretty agricultural those things are they cheap?

anyone know if these injectors would fine?

cant find top feeds to fit under my plenum.

http://www.ebay.com....47#ht_751wt_907

or

http://www.ebay.com....5#ht_1162wt_907

saves me having to change plenum...

highflows.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...