Jump to content
SAU Community

Just reset my ECU...

Jetdat

By Jetdat,
in General Automotive Discussion

 Share

Recommended Posts

Jetdat Veteran

Jetdat

Posted
Posted

I just had a new battery installed so i thought i would reset the ecu...

i have to say i never had a problem like flat spots or bad idle but i found that now i have more bottom end, and very suprisingly the rev limiter seems to be kicking in just past 7000, which before used to kick in around 6500!!! :D

and it not as violent as it was before the reset...actually its quite smooth...

i am wondering if anyone had similar results from an ecu reset, or anyone know why this happened....

look forward to comments.

Link to comment
https://www.sau.com.au/forums/topic/31590-just-reset-my-ecu/
Share on other sites
Genesis® Grand Master

Genesis®

Posted
Posted

i had similar results on my 32 as well. you basically reset the ECU so that it will relearn your driving characteristics again. i usually reset whenever i had any mods on the car such as air pod, exhaust, new oil change and even strut and sway bars. you will notice the RPM bouncing up and down a little but that's normal. run a search thru' the forums and you will probably find more comments on resetting the ECU.

Link to comment
https://www.sau.com.au/forums/topic/31590-just-reset-my-ecu/#findComment-637310
Share on other sites
Jay95R33 Grand Master

Jay95R33

Posted
Posted

Resetting has smoothed out things for me a few times.

After I've reconnected the battery I let the ECU learn things differently to other people do.

I start the car and let it idle for 5-10 mintues. First off it's a little high and sometimes it hunts a little. After a while it learns the idle and is perfectly smooth.

Then I'll turn the air con on and let it idle for about 5-10 mintues, again it hunts for a while then it's perfect. Then again with the air con on AND the rear demister on etc...

Then instead of taking it out and reving the crap out of it I just drive normal.

Works a treat for me.

J

Link to comment
https://www.sau.com.au/forums/topic/31590-just-reset-my-ecu/#findComment-637470
Share on other sites
Jetdat Veteran

Jetdat

Posted
  • Author
Posted

interesting comments so far...

i gotto say when i did the reset about 2 weeks ago i didnt notice much difference, but today i made sure i stepped on the brake pedal about 15 times to make sure all power drained...whereas 2 weeks ago i only pressed the brake pedal about 5 times.....

Link to comment
https://www.sau.com.au/forums/topic/31590-just-reset-my-ecu/#findComment-637576
Share on other sites
Jay95R33 Grand Master

Jay95R33

Posted
Posted

Don't bother pumping the brakes, just hold the pedal down for at least 30 seconds.

What it does is closes the circuit to the brake lights, the lights will then suck all the remaining power out of the car, eg. all the power out of the capasitors etc...

So once the power is sucked out of all the capasitors in the ECU it will loose it's memory.

J

Link to comment
https://www.sau.com.au/forums/topic/31590-just-reset-my-ecu/#findComment-637756
Share on other sites
[ant] Collaborator

[ant]

Posted
Posted

im a big advocate of resetting the ECU since i did it on my DR30 (FJ20ET engine)

my last car, S13, didnt seem to make huge improvements from ECU resets, mainly it did a bit wen i got full exhaust, and also wen i got big intercooler. but nothing major really.

but the DR! wen i got it it was running shit, misfiring like hell, seeming to hit the revlimiter as it tried to come on boost, hunting at idle, just running all shades of shite. then i changed the plugs (they were pretty worn out but not totally) and unplugged battery overnite and reset the ECU, and WALLAH! absolute perfection! revved rite from 0-7000rpm redline without a hiccup, didnt hesitate on gearshifts, and didnt hesitate on/off throttle.

it felt like a new car really just from ECU reset. but this is an old management system so its probably pretty shagged haha my mate said his FJ s12 did the same thing, wenever it got rough he just reset its ECU and it was perfect again!

also i accidentally overboosted mine to like 1.2bar and it made it go all retarded too so i had to reset to fix that. (0.9 is most i usualy run, or just under)

Link to comment
https://www.sau.com.au/forums/topic/31590-just-reset-my-ecu/#findComment-637849
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...