Jump to content
SAU Community

Recommended Posts

hey everyone im in the market for a rear bar

been looking for ages cant seem to find the one:(

ive been looking at the trial rear bar the carbon fibre version with

the rear diffuser (looks tuff :P )

what you guys recon i should get? bar or pods? and what one?

cheers :(

post-46453-1271648292_thumb.jpg

post-46453-1271648299_thumb.jpg

post-46453-1271648309_thumb.jpg

post-46453-1271648315_thumb.jpg

post-46453-1271647928_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/317301-cant-decide-on-a-rear-bar-for-my-33/
Share on other sites

Diffusers only fit standard rear bars.

So you would either have to heavily modify one or make one from scratch.

Nismo rear bar or if you want to add a rear diffuser, get the Top Secret rear add ons and then you can use the diffuser.

cheers for the advice guys!

ill have a look at the 400r rear bar

yes it is a gtst with gtr front end i found a guy with cheap parts

cheaper then the s1 r33 parts i needed! lol

this is what i was looking into :ermm:

i was going to fibreglass those shit holes on the bottom lol

post-46453-1271771069_thumb.jpg

post-46453-1271771096_thumb.jpg

post-46453-1271771140_thumb.jpg

Lol uwuish shutup it's beter then having nothing on there , it looks so shit my gtsr badges are

still coming :D I don't no y gtr owners full get cut haha

yer trial bar looks schmik I'm going to have a look to

tomorrow

I can't find a decent pick of the 400r rear does anyone hav pics

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...