Jump to content
SAU Community

Recommended Posts

Why on earth didn't you arrange to buy it back?!!!!

Being that it's older than 15 years old they are able to pay you out for it without writing it off and they selling it back to you at it's current wreck value.

The same thing happened to me recently with my 180b. I got sideswiped by some asswipe in a Patrol. He admitted fault so I took it to his insurance company. They offered me $2k - what it's worth as a wreck which was $100. I got to keep the car, still registered and they sent me $1900 for the trouble. If I could be bothered I'd be bale to fix it myself for around $300 but I just drive it around with a bit of damage to the front quarter and drivers door.

You shoulda done the same!!!

Hail damaged car are listed as a financial write off. I believe you need to do a VIV to get it back on the road and all hail damage must be fixed. You cant drive around with all the hail dents on it. Stupid law.

Doesn't apply to cars older than 15 years old.

Doesn't apply to cars older than 15 years old.

Hi,

I thought _all_ repairable write-offs required a VIV to be re-registered. Are you 100% sure about this? 

edit: hmmm... Just checked VicRoads web site. Vehicles over 15 years old aren't listed on the written-off vehicle register. It doesn't exactly say how to re-register in that case.

JH

Edited by jrh001

i think for vehicles 15years and older you have the damage fixed, get a rwc and re-register

a VIV is another certificate that has nothing to do with rwc, so once you get a VIV then you get a rwc and then re-rego

Hi,

I thought _all_ repairable write-offs required a VIV to be re-registered. Are you 100% sure about this?

edit: hmmm... Just checked VicRoads web site. Vehicles over 15 years old aren't listed on the written-off vehicle register. It doesn't exactly say how to re-register in that case.

JH

I went through this in November last year.

I got sideswiped by some guy. He agreed it was his fault. I took the car to his insurance. They told me they were going to put it in as a complete loss (ie. write off). When they saw the look on my face they informed me that they do not need to tell VicRoads as the car is older than 15 years old and that I could continue to legally drive it.

They sent me a cheque for a value we agreed on ($2k) minus what they felt was a fair price for a 180b "wreck" ($100). I still have the car and it's still registered (re-registered it in March this year).

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...