Jump to content
SAU Community

Recommended Posts

Morning Gents and others...

I'm looking to relocate the batter to the boot in the S13 track warrior and I'm wondering what the ruling is on a battery in the boot when there is no partition between the boot and the cabin, as the rear of the car is stripped.

It's a standard Calcium hybrid battery, with vent holes in the little plugs where you can top up the distilled water if necessary.

In my head I think you have to have it fully sealed in the boot but with some ventilation to outside of the car, does this sound right and if so how have others done this.

Cheers

  • 9 months later...

searched the CAMS manual but failed to find anything on the website version.

can a normal battery be mounted in the boot of a 32. It doesn't share the same space as the cabin so is that considered isolated from the cabin? reason I ask is that I have a batt box but it's massive and can't find a nice small one to fit neatly in the corner of the boot so wanted to know if I can just mount it in the corner without the box?

Sealed from the cabin is one thing but don't you have to vent a normal battery to the exterior of the boot space? Or is that only if there's no partition between the boot and cabin?

have a look at how R34 GTRs do it. they have a little vent tube that exits through a small hole (with rubber grommet) in the boot floor. with a battery like that you would probably not have to box it. places like battery world etc have those batteries. they are basically a normal battery that are sealed on top with just one vent for overflow or gas and it comes with the tube already attached. that's what I'd use. they are designed to be used in the boot space of cars (like R33 and R34 GTR etc).

have a look at how R34 GTRs do it. they have a little vent tube that exits through a small hole (with rubber grommet) in the boot floor. with a battery like that you would probably not have to box it. places like battery world etc have those batteries. they are basically a normal battery that are sealed on top with just one vent for overflow or gas and it comes with the tube already attached. that's what I'd use. they are designed to be used in the boot space of cars (like R33 and R34 GTR etc).

ah ok. I was thinking I could get away with it as 33 and 34's have it basically sitting in the boot. Didn't know about the different kind of battery.

yeah 33s and 34s are sitting in the boot but they are sealed on top and have an external vent/drain pipe. it's just a little clear plastic pipe about 8mm diameter and I guess they've just covered the top of the battery with a plastic cover with just the single vent hole with pipe on it instead of little vents on each cap. they are easy to find and no more expensive than other batteries of similar size. not sure if you have battery world in melb but if you do go there and ask for an R34 GTR battery and you should get what you need.

cool. personally though I'd still buy one of the batteries with the vent tube on it. they are not really any more expensive than other batteries of similar quality and size and it's nice to have the knowledge that if it does need to vent it's not going to do so all over your wiring, or surge tank or whatever. :)

they look like this:

interstate_mtp_91.jpg

see the little picture of the race car on the battery? just above it is the point where the vent tube connects. most come with the tube too. any battery world shop will supply one.

edit:

found an even better pic. you can see clearly where the drain tube attached on this one.

diehard_grp48.jpg

they look like this:

interstate_mtp_91.jpg

see the little picture of the race car on the battery? just above it is the point where the vent tube connects. most come with the tube too. any battery world shop will supply one.

edit:

found an even better pic. you can see clearly where the drain tube attached on this one.

diehard_grp48.jpg

Thanks mate. I will get one of them next time or maybe even a dry cell.

Seriously, juest get a dry cell. It depends on how many amp hours you think you want but it can save quite a few kgs.

This is just on Amazon. Proper Braille motorsport battery.

Braille Battery 11.5lb, 904 pulse cranking amps, 360cca, 15amp/hr 1yr warranty - Left Side Positive Terminal

Cost is $160 + freight.

You can get other larger capacity (amp hours) locally for not much more.

The one I got for the Silvia was from a local guy, $150, 780PCA, around 280CCA, weighed a kg or two less than what I had.

Perfect for a little 4 banger like mine. I reckon it'd start a small 6 easily enough too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...