Jump to content
SAU Community

Recommended Posts

Thanks David

No worries.

Like I said that is an approximate. Know of several (four other members!) others who have cc'd their heads and got 62cc or there abouts. Its fairly accurate "approximation" to assume yours will be the same.

If you're shooting for 9:1, just make sure your builder/assembler knows this and machines the assembly accordingly.

I think its weird that its not more commonly known (the chamber volumes)

I guess it comes down to not many people touching the heads on RBs and simply throw a bigger turbo and more boost at it to make power.

This also relates to CP/Weisco etc labling the comp ratios for pistons straight out of the box.

No worries.

Like I said that is an approximate. Know of several (four other members!) others who have cc'd their heads and got 62cc or there abouts. Its fairly accurate "approximation" to assume yours will be the same.

If you're shooting for 9:1, just make sure your builder/assembler knows this and machines the assembly accordingly.

wildo, costing me enough as it is, dont want to risk phucking it up. . :thumbsup:

Rb25 & rb26 I've seen all varied from 62-67. Neo's from 52-56. The first 20 thou ground off an un machined 25 & 26 head removes exactly 2CC's and it always varies from there

piston to deck heights varied too,

rb30 with rb25/26 pistons 10 - 40 under

rb30de pistons 20 thou under to 10 thou above

5 thou above will usually add .25 to the comp ratio

a 1.8 gasket replacing a 1.2 can lower the comp by around 0.75

  • 2 months later...

My RB30DET is running,

modified r33 25 head, drilled oil returns, welded water and vct, 20 inlet cam, 25 exhuast cam, full reco and skim.

RB30 block, drilled oil returns, drilled & taped tensioner, 1.0mm oil restristors, deburred and honed.

RB30 crank, grub screwed & crank collar, linish and balance.

RB30E std piston and rod, new rings, acl race bearings,

Cometic 1.2 MLS head gasket, genuine nissan gasket set.

N1 oil & water pumps, dayco 94407 timing belt, 2x tensioners.

Garret GT3071r 3037s 56t .63. ebay hi mount, tial 38mm gate, nismo 750cc, Freddy, apexi pfc, 3x pumps.

Heaps of Torque & 12psi @ 2500rpm :whistling:

Next: E85, reposition wastegate & tune

Edited by RED513

So just as I finish sorting out all the teething problems of the new setup and was thinking of booking it in for a tune.. some dumbass P-plater tries to make the gap and failed hard :(

The old girls heart will beat again soon, hopefully in the body of a sexy young 34 :whistling:

post-31803-0-66439500-1324344558_thumb.jpg

post-31803-0-09321800-1324344625_thumb.jpg

  • 3 weeks later...

New engine has just been tuned. I have a nice 300rwkw tune for pump fuel as thats plenty for the street. And a 475rwkw E85 tune at only 24psi as that seems the be the limit of my exhaust system.

It makes 180rwkw @ 4000 and 360rwkw by 4500 so things get fun pretty quick.

Just need a 4" system and a less restrictive muffler and should make more but this will do for now :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...