Jump to content
SAU Community

Recommended Posts

Hi guys,

Would you reccomened me importing an mr2 turbo from japan? or would it be cheaper to buy one? I've been reading that it's hard to get a car landed for less 10k and most MR2's seem to be around 8-13k.

I have seen MR2's in japan around 2k.

The MR-2 turbo (SW20 model) is not allowed for import to Australia with the current laws. The only MR-2 you can import is the earlier AW11 model built in 1988 or earlier, so if you wanted an SW20 turbo then you will have to buy one locally unfortunately.

  • 4 weeks later...
The MR-2 turbo (SW20 model) is not allowed for import to Australia with the current laws. The only MR-2 you can import is the earlier AW11 model built in 1988 or earlier, so if you wanted an SW20 turbo then you will have to buy one locally unfortunately.

Serious?? O.O

i was going to import a mr2 gts from Japan...

oh man, all the gts and even the older gt version are so expensive in Australia.

And i thought we can import them because Australia didn't produce any mr2 >.<

if it's ban from importing, what is the reason? emission?

The import laws are fairly simple for this sort of car ... they are not allowed for import under the SEVS laws because the SW20 model MR-2 was sold in Australia in full volume (different engine makes no difference), so the only other way it could be imported under would be the pre-1989 laws however the SW20 was not built as early as 1988 so that is out too!

  • 2 weeks later...

no you couldn't. :blink: doesn't matter if it's from canada or west africa for that matter. same rules apply. even if it did make a difference (which is doesn't) LHD would just make it even more of a hassle.

they are not exactly a big dollar car over here. there is a big range in price but a early 90s turbo model is $10K and up and a non-turbo under $10K no problem.

I imported an SW20 mr2 in feb 2006. It would have been one of the last ones to come into the country. It was done under the old 15 year rule, after it was abolished, thanks to a bloke who had stocked up on a heap of vehicles knowing that the rules were soon to change.

Anyhow, despite a good report from the agent, it turned out to be pretty rough.

Even if importing was still an option for these cars, i wouldnt recommend it. The costs are likely to be about the same as buying locally.

They are an old car now. The ability to test drive one, and have it properly checked out, is godsend.

I imported an SW20 mr2 in feb 2006. It would have been one of the last ones to come into the country. It was done under the old 15 year rule, after it was abolished, thanks to a bloke who had stocked up on a heap of vehicles knowing that the rules were soon to change.

Anyhow, despite a good report from the agent, it turned out to be pretty rough.

Even if importing was still an option for these cars, i wouldnt recommend it. The costs are likely to be about the same as buying locally.

They are an old car now. The ability to test drive one, and have it properly checked out, is godsend.

sound advice backed with actual real world first hand experience. :D what more can you ask for?

anyway, as above importing is no longer an option so in this case the choice is made for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...