Jump to content
SAU Community

Recommended Posts

Firstly I have a R32 GTST with a Rwd Rb26 conversion.. The loom and full running gear is Rb26 so nothing is Rb20 in the car at all!

So the engine is in, Gearbox just got put in but they didnt plug up the gearbox so I gotta take it back and the custom tailshaft is being made this week.

Not everything is plugged up etc looms..but everything is in place. Dash lights work and clock but nothing else on the dash. Starter motor, Speedo drive etc still need to be plugged up. Some bolts are missing underneath the car..like steering column.. so pretty much the whole car needs to have a good look through.

Anyways once I get the tailshaft and I have gotton the gearbox all plugged up im thinking about taking the car to Classic Performance? Ive heard Ashley knows what he is doing.. etc he has a Rb26 in a commondore ute and only charges $88 an hour...

Anyone know where I should go and who to see... Ive called up More Power and they didnt seem to keen to touch the car. I just wanna take the car somewhere where they can finish it off and I can come pick it up and drive it home.

Any Suggestions in what I should do?

I would do a lot myself but I am 3 months Pregnant so no hope for me in touching the car...

Link to comment
https://www.sau.com.au/forums/topic/319256-trying-to-get-my-car-on-the-road/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Firstly I have a R32 GTST with a Rwd Rb26 conversion.. The loom and full running gear is Rb26 so nothing is Rb20 in the car at all!

So the engine is in, Gearbox just got put in but they didnt plug up the gearbox so I gotta take it back and the custom tailshaft is being made this week.

Not everything is plugged up etc looms..but everything is in place. Dash lights work and clock but nothing else on the dash. Starter motor, Speedo drive etc still need to be plugged up. Some bolts are missing underneath the car..like steering column.. so pretty much the whole car needs to have a good look through.

Anyways once I get the tailshaft and I have gotton the gearbox all plugged up im thinking about taking the car to Classic Performance? Ive heard Ashley knows what he is doing.. etc he has a Rb26 in a commondore ute and only charges $88 an hour...

Anyone know where I should go and who to see... Ive called up More Power and they didnt seem to keen to touch the car. I just wanna take the car somewhere where they can finish it off and I can come pick it up and drive it home.

Any Suggestions in what I should do?

I would do a lot myself but I am 3 months Pregnant so no hope for me in touching the car...

first of all wow and congrats

give other workshops around adelaide a call.....boost wor, graham west, willall, smooth garage

Classic Performance will sort you out.

Ashley has also built plenty of bullett-proof RB25's.

And I take my GTR there and swear by them.

Wouldn't touch the other few ones. Heard too much bad shit about that bunch.

Edited by CRoNic...
Classic Performance will sort you out.

Ashley has also built plenty of bullett-proof RB25's.

And I take my GTR there and swear by them.

Wouldn't touch the other few ones. Heard too much bad shit about that bunch.

I wouldn't listen to any 'second hand' information from people in Adelaide. Too many people with no idea and just like to gossip like little bitches. I know a few personal experiences or direct experiences of some workshops where talk might be true, but I also know of a lot of stories that are also unfounded and based on car owners with no idea, or unreasonable expectations.

To be honest I've never heard of Classic Performance but Ashley seems to get a good wrap :) After many years in the scene you get to know your own crowd and become loyal to people. Sounds like you're on a winner though.

Kahli, have a chat to Nicko or Ben from Smooth Garage. Not sure how busy they are now, but they may be keen to have it finished up for you :thumbsup:

I wouldn't listen to any 'second hand' information from people in Adelaide. Too many people with no idea and just like to gossip like little bitches. I know a few personal experiences or direct experiences of some workshops where talk might be true, but I also know of a lot of stories that are also unfounded and based on car owners with no idea, or unreasonable expectations.

To be honest I've never heard of Classic Performance but Ashley seems to get a good wrap :D After many years in the scene you get to know your own crowd and become loyal to people. Sounds like you're on a winner though.

Kahli, have a chat to Nicko or Ben from Smooth Garage. Not sure how busy they are now, but they may be keen to have it finished up for you :)

And i recommend not.

Willall.

If you trusted them to start work on your car, let them finish the work.

If you take it anywhere else you are going to get absolutely raped price-wise, as it is not their project.

I'd hit up smooth garage and willall

I've had niko and benny work on my cars and have nothing bad to say about them and they are quite helpfull. I own nikos old s13 and turned it into my drifter and it loves the thrashing it gets and it built very well by smooth.

I've also owned martin donnans old 33 4 door with a forged 26 init. The build quality was great and was set up really well. Someone deffenetly knew what they where doing there.

Ive used a few of the other import workshops and haven't been as happy as I am with the ones above. But for reffence I haven't used classics before but my mate did and another ones does and they are also quite happy with the results.

Hey guys cheers for the come backs.. and also support (:

Im running a Rwd Rb26 gearbox which i got custom done... as I stated its all rb26 running gear lol

Yeah i used to go to smooth garage ..nice blokes but ive had a bad experience years ago.. Might have to give them another chance (:

I spoke to Ashley and he seemed like he knew what he was saying.. and sounded pretty confident.

Cheers for the help!!!

Firstly I have a R32 GTST with a Rwd Rb26 conversion.. The loom and full running gear is Rb26 so nothing is Rb20 in the car at all!

So the engine is in, Gearbox just got put in but they didnt plug up the gearbox so I gotta take it back and the custom tailshaft is being made this week.

Not everything is plugged up etc looms..but everything is in place. Dash lights work and clock but nothing else on the dash. Starter motor, Speedo drive etc still need to be plugged up. Some bolts are missing underneath the car..like steering column.. so pretty much the whole car needs to have a good look through.

Anyways once I get the tailshaft and I have gotton the gearbox all plugged up im thinking about taking the car to Classic Performance? Ive heard Ashley knows what he is doing.. etc he has a Rb26 in a commondore ute and only charges $88 an hour...

Anyone know where I should go and who to see... Ive called up More Power and they didnt seem to keen to touch the car. I just wanna take the car somewhere where they can finish it off and I can come pick it up and drive it home.

Any Suggestions in what I should do?

I would do a lot myself but I am 3 months Pregnant so no hope for me in touching the car...

and your how old again?

and your how old again?

And that is relevant to who will fix her car, how?

Kahli, there's lots of good suggestions here, best of all; talk to the people. It's all well and good everyone telling you where to go, but if you go to a place recommended and you just don't get on with them, it doesn't really make for a pleasant experience

and your how old again?

I fail to see how this is any of your business reguardless?

Are you suggesting not old enough?... Who are you to judge on 'old enough' or even to judge at all?

ive known a few guys who have had plenty of work done by both boostworx and wilall, and have recommended them strongly.

i havent used either myself, but i was always planning on getting wilall to tune my 200.

and your how old again?
i was merely asking a question

ffs guys get over it.

i wasnt getting at anything.

but im not interested in playing these stupid little games so i wont be replying again on this matter

i know its already been covered, but keep your f**kin opinions to yourself eh? no matter what you say after the fact, that was an obvious bait. the last thing she needs is people (like you) getting up on a high horse and throwing down shit like that. next time you feel the need to say something like that, buy a supercharger instead.

best of luck with the pregnancy and the car kahli. :rofl:

Edited by scandyflick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...