Jump to content
SAU Community

Recommended Posts

ive got the same problem in my 33 gts4. The AWD Light Is On And when the AWD comes in the SLIP light dose not flash on. It is still working tho.

Ive had is checked out by two different mechanics and an auto electrician and they cant find the problem, I had it hooked up to a Nissan diag test and it came up with an ABS problem, Got a new unit and Still the same issue.

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5219412
Share on other sites

Have you got the same size tyres and rims front and rear? Having different rolling circumfrances will cause this problem as the computer reads the front wheel travelling faster than the rears or vice versa

Edited by R32GTS4NZ
Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5227410
Share on other sites

Have you got the same size tyres and rims front and rear? Having different rolling circumfrances will cause this problem as the computer reads the front wheel travelling faster than the rears or vice versa

This... different wheel circumfrence is bad enough for a regular diff, and for AWD... my parents dropped about $5k worth on diff repair/replacement in their Volvo XC70 before it was discovered that a tyre shop (that shall remain nameless) put the wrong diameter tyre on... fairly subtle difference too apparently. Aforementioned tyre shop ended up reimbursing them for diff repair/replacement, towing fees etc.

So I wouldn't at all surprised if it would also cause ATTESA to chuck a spaz.

http://www.skylinesaustralia.com/forums/St...amp;pid=4643006 - suggests that a 2% difference in rolling diameter is acceptable, maybe check your tyre/rim sizes?

If it's not that, I have NFI coz I don't really know much about ATTESA :P (jack in fact)

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5231608
Share on other sites

Hi guys,

Just want to know how to check if your 4wd is working? My 4wd light is on and the fuse is in aswell. What could be the problem if my 4wd isnt kicking in.

Thanks

If the 4wd light is on, there is a fault. So obviously it isn't going to work.

Check the fault code.

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5232286
Share on other sites

The light isn't on to tell you it is working... there is a fault. Wether you in particular have some weird-o issue that no matter the amount of auto tech's can't find is not the question, in the op's case that is what he needs to do first.

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5232436
Share on other sites

if you want to see if its working, drop the clutch on some grass and see if the front tyres spun as well. either the grass will be flat, beaten and ripped a bit, or it'll be dug up. or do the same on some dirt or something. but if the car flys off into the distance instead of just sitting there burning out its probably working...

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5232900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...