Jump to content
SAU Community

Recommended Posts

1/4 mile question: Few months ago i went to Heathcote for the first time and ran my car 1/4 mile. I did worse than i expected.

Ever since that day me and a mate have been debating our actions that day, and we haven't resolved it therefore i thought i'd ask you guys for your opinions

Car: R33-hiflow turbo, Mines ecu, 16 psi, 2.5 inch turbo back exhaust, split fire coil pack, apexi 3 inch intake, r34 cooler.

The big QUESTION: When i got to Heathcote, my friend advised me to unbolt my exhaust just before cat as "this will improve" the car, car will go better in his opinion.

I ran 14s flat at best, embarrassing, and in my opinion the car didn't run as good, just sounded loud and tough, but i don't think it went any better, if anything, went worse.

So, questions is, DOES UNBOLTING EXHAUST BEFORE CAT HELP? Please elaborate on your answers-some people say no, you need compression others say yes, better flow. ?

97607537.jpg

Edited by adis
Link to comment
https://www.sau.com.au/forums/topic/320194-14-mile-question/
Share on other sites

Unbolting the exhaust won't do sh|t if the exhaust is already free-flowing enough. So unless you've tested it on a dyno to actually be a restriction then i'd be inclinded at this stage to say there is no benefit. (See point #4 further down).

So that part of your thread is largely pointless, so don't listen to your friend anymore me thinks... :3some:

What information/issues there are though... as follows.

1. What were your 60ft times?

2. MPH?

3. Actualy ET?

The above three will give a much better idea of what is going on.

4. You are running a yum-cha ECU/Tune (ie, not a properly tuned setup). It's probably rich as all buggery which is not helping the situation so dropping the exhaust wouldn't have even made much difference if there was restrictions anyway.

Unbolting the exhaust won't do sh|t if the exhaust is already free-flowing enough. So unless you've tested it on a dyno to actually be a restriction then i'd be inclinded at this stage to say there is no benefit. (See point #4 further down).

So that part of your thread is largely pointless, so don't listen to your friend anymore me thinks... :)

What information/issues there are though... as follows.

1. What were your 60ft times?

2. MPH?

3. Actualy ET?

The above three will give a much better idea of what is going on.

4. You are running a yum-cha ECU/Tune (ie, not a properly tuned setup). It's probably rich as all buggery which is not helping the situation so dropping the exhaust wouldn't have even made much difference if there was restrictions anyway.

Correction, when i ran the car i had 14 psi, and stock cooler and stock 2.5 inch intake with pod. (190kw at wheels)

1. What were your 60ft times? 2.37

2. MPH? 104.02

3. Actualy ET? 14.0034

temp 35.3 C (lol)

-is it possible for the car to be more laggier? Because for some reason the car felt laggy once i took the exhaust off?

Correction, when i ran the car i had 14 psi, and stock cooler and stock 2.5 inch intake with pod. (190kw at wheels)

1. What were your 60ft times? 2.37

2. MPH? 104.02

3. Actualy ET? 14.0034

temp 35.3 C (lol)

-is it possible for the car to be more laggier? Because for some reason the car felt laggy once i took the exhaust off?

Ok so…

1x stock turbo

1x 2.37 60ft

1x 14.0 ET

1x approx 45 degree track temp/35 ambient

Sounds 100% normal to me all things considered.

Exactly what I would expect from a 60ft such as that on factory turbo without a proper tune and decent 60ft time.

The fact you are running 14psi through it wouldn’t have been doing any favours either.

Then add in the factory I/C… high ambient temps… after a few runs it would just be pushing hot air around. It's big fat mess of a situation! If anything running a 14.0 was probably as good as it was ever going to get!

Either way as I said – Sounds 100% normal. Nothing to worry about. Dropping the exhaust just added to the already bad state of tune/setup so no surprise it probably did more harm than good.

check the tune - how well is it tuned? is it tuned enough?

check your tyres (good? worn? new? wide enough?)

check tyre pressure (what was it?) should be 20psi for drag

with the same mods, but stock turbo i was able to do 13.7 @ 105mph with cold track and slipping diff

so it should have been quicker. my 60s were lower and my mph was the same and 1/4 was less

check the tune - how well is it tuned? is it tuned enough?

check your tyres (good? worn? new? wide enough?)

check tyre pressure (what was it?) should be 20psi for drag

with the same mods, but stock turbo i was able to do 13.7 @ 105mph with cold track and slipping diff

so it should have been quicker. my 60s were lower and my mph was the same and 1/4 was less

What paul said. I was able to run 13.4 with that mph.

Concentrate on your 60 ft times and your et.s will drop considerably.

  • Nope 1
here is a mines map versus factory... bugger all diff. It is doing jack for you... time for a decent ecu and cooler as posted previous.

I made 220kw on mines ecu, 16 psi, and all those mods. If i was to get a front mount, and get ecu, you still cant go past 230kw due to injectors and z32 maxing, so is it really worth it? ... i thought about it but in the end opted not to waste 1k for 10kw. My current tune is still safe, on 220kw

When i ran the car i only had 190kw and didnt have half the mods. Will be interesting to see what i get now, with exhaust on.

average power makes the car quicker = quicker 1/4 time

peak power in one spot means nothing

on the street you car would be ass to drive, it would lack power and midrange

with a full tune, intercooler and real ECU the car would fly

I made 220kw on mines ecu, 16 psi, and all those mods. If i was to get a front mount, and get ecu, you still cant go past 230kw due to injectors and z32 maxing, so is it really worth it? ... i thought about it but in the end opted not to waste 1k for 10kw. My current tune is still safe, on 220kw

When i ran the car i only had 190kw and didnt have half the mods. Will be interesting to see what i get now, with exhaust on.

your on crack if you make that much power (cant be nice power either) on a r34 SMIC... its a time bomb. I hope you monitor your ait's.

I made 220kw on mines ecu, 16 psi, and all those mods. If i was to get a front mount, and get ecu, you still cant go past 230kw due to injectors and z32 maxing, so is it really worth it? ... i thought about it but in the end opted not to waste 1k for 10kw. My current tune is still safe, on 220kw

When i ran the car i only had 190kw and didnt have half the mods. Will be interesting to see what i get now, with exhaust on.

10kw peak?

Or how about 20-30kw through the midrange? That is certainly worth the money of a FMIC ($500) and ECU/Tune ($1800). You don't need to get injectors or AFM... and hell if you get a PFC etc you can tune past the AFM quite safely anyway within reason.

That is where the real gains of a proper ECU & tune lie, and that is what will make a car fast.

The Mines tunes generally are only marginally better than factory in most cases - they are super fuel'd and hurt the midrange power signifigantly as a result.

Yes they are "safe", but an aftermarket tune can net

1. Better economy

2. Better mid range/transitional power

3. Better peak power

#2 obviously being the biggest improvement and you'll easily notice this driving it after a decent tune is performed.

also wouldn't call 16psi out of a highflow turbo running though a r34 SMIC a 'safe tune'

Probably the only saving grace is the Mines ECU doing its super-fuel up :thumbsup:

Either way i agree, running that much boost is asking for trouble.

After a good 15mins hard drive on the street with sufficient heat soak and so on it's probably just luck nothing is really going wrong.

Cmon man you wanna have your car running decent times and you dont want to get a decent ecu and tune a front mount, thats one of the first things youd want to get let alone looking at your suspension and tyre issues after if you want to improve your times even more.

your on crack if you make that much power (cant be nice power either) on a r34 SMIC... its a time bomb. I hope you monitor your ait's.

Im on crack? ill ignore that just be careful my friend...im not here to insulted, just asked for opinion.

I took it to a tuner like your self, he chucked it on a dyno and thats the result i got.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...