Jump to content
SAU Community

Recommended Posts

ok guys, so my car is missfiring and i dont know why...ive upgraded my coil packs to split fires and my spark plugs to iriways which were like $36 a pop and were recommended on the forums and are only like 1k km old ..so whats next? im thinking of just cleaning the coil packs and giving that a go and also i dont have a cover over the coil packs and i heard that lets moisture in? so i might search for one because i have my car booked in for a tune next week :devil: any help would be great. thanks

Link to comment
https://www.sau.com.au/forums/topic/321356-yes-another-missfire-thread/
Share on other sites

running 12psi but it spikes 14psi, i got the ngk iriway spark plugs they come already gaped at .8mm.....im guessing maybe its because i bought the split fires second hand...but ive had them for like 6 months and no problem..im hoping its not the coils, and not the spark plugs lol because ive spent heaps on both of them. its not a really bad miss fire, just a few pops

no i havnt had it washed or detailed, only when i have it on high boost it will pop when hitting 5k rpm, on low boost might pop a tiny bit. i heard wrappin ur coil packs in silcone works, wot kind of silcone do i use?

Well that depends on the purpose of the silicone. Are you trying to retard water and keep moisture out? Are you trying to make a seal? If you're trying to keep water out, get a silicone which is safe for plastics(some of them have harmful fumes which can deteriorate plastics).

Did this start all of a sudden? Did you change anything? Is your engine running rich or lean? If its rich its unburnt fuel, if its lean, it could cause popping and it could mean your fuel pump is failing and falling behind when hitting high boost.

no i havnt had it washed or detailed, only when i have it on high boost it will pop when hitting 5k rpm, on low boost might pop a tiny bit. i heard wrappin ur coil packs in silcone works, wot kind of silcone do i use?

sounds like the stock ecu trying to protect your engine from too much boost, it will probably go away with the powerfc fitted.

ok so i was bored at 1am and decided to pull apart my engine bay, i took out the coil packs and cleaned them with silcone spray coz they were WAAAY too dirty all over....pulled out the spark plugs, and i noticed 1 spark plug had alittle hairline fracture on the side of it, but because i didnt have a spare spark plug i just put it all back together n thought id give it a run...and now its not miss firing, could cleaning of the coil packs make it stop miss firing? and should i replace that 1 spark plug?

If it missies again its because its hitting 14psi with 1.1gap and just use the cheap copper ones if gona be running more than 12 psi get yourself a set of bcrpre7s like $3 each and they come gaped at 0.8 and that will not missfire under high boost. But yeah could of been just maybe the sparkplug was to loose or the coil pack wasnt on the spark plug well if its gone now.

sounds like the stock ecu trying to protect your engine from too much boost, it will probably go away with the powerfc fitted.

This is most likely your problem.

If I remember correctly, stock ECU will have hissy fit when you run more than 10psi boost.

Get PFC tuned, it should solve the problem.

If it missies again its because its hitting 14psi with 1.1gap and just use the cheap copper ones if gona be running more than 12 psi get yourself a set of bcrpre7s like $3 each and they come gaped at 0.8 and that will not missfire under high boost. But yeah could of been just maybe the sparkplug was to loose or the coil pack wasnt on the spark plug well if its gone now.

they arnt cheap spark plugs bro, they r ngk iriway7's $36 ea gaped at 0.8mm, i think it was because they were abit loose or coz the coil packs were dirty coz now its working fine :S.

they arnt cheap spark plugs bro, they r ngk iriway7's $36 ea gaped at 0.8mm, i think it was because they were abit loose or coz the coil packs were dirty coz now its working fine :S.

Nah im saying you should use the copper ones there the best at the end of the day. The iriway and all that is just waste of money for no gains.

Nah im saying you should use the copper ones there the best at the end of the day. The iriway and all that is just waste of money for no gains.

oh ok, well thanks for that..if it starts miss firing again i might go those then

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...