Jump to content
SAU Community

Recommended Posts

Hi,

Looking for some information from people that run stack dash in their race cars. I'm looking to purchase one for my r33 and just wondering how hard it is to wire everything up? How does the dash get the speed and rpm reading?

Also were did you get your dash from and how much did it cost?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/
Share on other sites

I suggest you really need to do some reading. There are so many options, you can get speed and rpm from ecu, you can get it from one wheel speed sensor or 4 wheel speed sensors. The cost depends a lot on which model you go for, as the number of channels and options vary greatly. Also the cost of the sensors varies greatly depending on what you want to monitor.

You can buy them used out of Europe for less then 3k with sensors

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5257205
Share on other sites

cheaper option is the haltech racepak dash... last i checked was $1000 for basic or $1700 for logging version.. can run off most a/m ecu's by the CAN cable..... or something lke that...

personally i think the Stack dash looks like snow thats been driven over several times.

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5257218
Share on other sites

RB31 has a Sard Stack Dash for sale.. link below..

http://www.skylinesaustralia.com/forums/Sa...30-t320624.html

As a reference;

HALTECH IQ3 512Mb GPS Logger Dash RRP $2,495.00

HALTECH IQ3 Display Dash RRP $1195.00

Cheers,

Johno

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5257522
Share on other sites

That was the reasoning for my final decision, I much prefer the analogie tacho over the bar graphs. The warning lights let you know to look at the LCD display, and I found it easy enough to read, though it could be a bit bigger.

The downside to it is that all the expansions are hellishly expensive! For that reason alone it may be worth considering the others such as AIM or the DL1 etc. Upgrading mine to data/video logging specs is frightening cost wise.

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5257540
Share on other sites

That was the reasoning for my final decision, I much prefer the analogie tacho over the bar graphs. The warning lights let you know to look at the LCD display, and I found it easy enough to read, though it could be a bit bigger.

The downside to it is that all the expansions are hellishly expensive! For that reason alone it may be worth considering the others such as AIM or the DL1 etc. Upgrading mine to data/video logging specs is frightening cost wise.

Pretty much the same reason im going to go with the stack dash, not interested in a digital tacho.

Some more information, i am looking at the Street-Race series "Stack ST8130M Street Dash Display Max". Has built in lap time feature which looks good but not 100% sure if its worth the extra cash as i do already have a racelogic data logger.

From what i can tell from the street dash, it comes with everything needed but the fuel level sensors but i read you can just the stock one and set it up to work with the stack dash. Also i will be looking at getting the 5-Stage Ext. Sequential Shift Light.

Personally for the price i think its great value, had alook at some USA and UK website looks like can get the dash for 2k or under brand new.

Interested in how hard it was to setup phunky?

I will be looking at adding some of the features from the stock dash to the stack dash (plan to get the cf surround for the r33 from sard in japan)

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5257901
Share on other sites

I have the ST8100 race dash it does not have blinker lights or fuel level but does have fuel pressure. I am installing mine on the weekend so i will let you know how i go but it looks like a piece of cake.

I have the 0-3 8000 rpm black one with no options, i was the same i love the fact the the tacho is analogue and has the staggered 0-3 then wide spread to 8000rpm. I priced the others for a while and buy the time you get all the required components it adds up to almost twice the price of the little stack dash.

I will post up some pics in my build thread.

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5258139
Share on other sites

I have the ST8100 race dash it does not have blinker lights or fuel level but does have fuel pressure. I am installing mine on the weekend so i will let you know how i go but it looks like a piece of cake.

I have the 0-3 8000 rpm black one with no options, i was the same i love the fact the the tacho is analogue and has the staggered 0-3 then wide spread to 8000rpm. I priced the others for a while and buy the time you get all the required components it adds up to almost twice the price of the little stack dash.

I will post up some pics in my build thread.

thanks that would be great, would like to see what the 0-3 8000rpm one looks like as i was tossing up between that one and just the normal 0-8000.

Due to my track car entering street events i will need to go with the one that has blinkers and fuel level.

where did you buy yours from?

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5258164
Share on other sites

I suggest you really need to do some reading. There are so many options, you can get speed and rpm from ecu, you can get it from one wheel speed sensor or 4 wheel speed sensors. The cost depends a lot on which model you go for, as the number of channels and options vary greatly. Also the cost of the sensors varies greatly depending on what you want to monitor.

You can buy them used out of Europe for less then 3k with sensors

i found them brand new from the us for 1.5k (US) or 700 from the uk (1.3k aus). that is for the basic pack which comes with the harness, dash, oil, temp and fuel senders

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5258227
Share on other sites

I was keen on the stack dash purely because of the Tacho being analogue.

BUT after researching for weeks about the competitors ended up getting the AIM dash, IMO better and cheaper and still CAN compatible for the M800 to talk to.

This was my overriding requirment. Not to duplicate sensors all over the car.

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5259212
Share on other sites

Pretty much the same reason im going to go with the stack dash, not interested in a digital tacho.

Some more information, i am looking at the Street-Race series "Stack ST8130M Street Dash Display Max". Has built in lap time feature which looks good but not 100% sure if its worth the extra cash as i do already have a racelogic data logger.

From what i can tell from the street dash, it comes with everything needed but the fuel level sensors but i read you can just the stock one and set it up to work with the stack dash. Also i will be looking at getting the 5-Stage Ext. Sequential Shift Light.

Personally for the price i think its great value, had alook at some USA and UK website looks like can get the dash for 2k or under brand new.

Interested in how hard it was to setup phunky?

I will be looking at adding some of the features from the stock dash to the stack dash (plan to get the cf surround for the r33 from sard in japan)

I have the ST8130, and then bought the lap timer and beacon seperately (for a steal out of the 'states, but from memory you can get them for around $500US). If you've already got the Racelogic then maybe you should keep that as the data logging features for the Stack are ridiculously expensive.

As far as fuel is cincerned, yep, that's correct. We're havign dramas with mine calibrating at the moment, but my fuel float is buggered so I'd say that's the issue for me. Also getting the speed sensor to work has been a bit of an issue, but we haven;t spent too much time on it as we've had bigger issues to deal with!

When assessing which system to get I spoke with my mechanic/auto elec aqnd he felt the Stack was the easiest to set up due to the configuration of the loom. He didn't run into any dramas, and it was all pretty simple, and very neat.

As far as the Defi dash goes, I think it's the nicest dash out thee, but being Japanese only I was worried about some of the functionality, including the GPS based track timing, and in the end decided against it. Perfect mix of everything as far as a display only dash goes though imo.

Link to comment
https://www.sau.com.au/forums/topic/322327-stack-dash/#findComment-5259282
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...