Jump to content
SAU Community

Recommended Posts

  • 2 months later...

Got the wastegate actuators and fitted em up. Was a real pain to do as there is no room, but all good now.

Also got a hold of a nismo cat converter to help free up the exhaust a bit more. I'll fit it up when I can be bothered crawling under the car again.

Sway bars have been ordered in too. :P

post-12712-1288141922_thumb.jpgpost-12712-1288141978_thumb.jpg

post-12712-1288142025_thumb.jpgpost-12712-1288142073_thumb.jpg

post-12712-1288142164_thumb.jpg

Love the work. Was wondering what are the benefits of replacing the wastegate actuators? or is it more of a preventative measure?

I always seem to get a bit of wastegate "flutter" under light acceleration (0.2 - 0.4 bar), even worse after a cold start. and so it stutters and bogs down unless I accelerate more to bring on higher boost.

Does that make sense? It's hard to explain but that's the best way I can describe it. I've read around of people having similar problems on rexies, and some suggest tightening the actuator arm. Is that possible on our skylines?

  • 2 weeks later...

Thanks Owen!

Only if you replace the actuators with adjustables or get some with a higher spring setting.

I replaced them to get a more stable boost at high boost settings. The standard one's tended to drop in the mid-high range of RPM.

I get the same problem, but at highway speeds in 5-6 gear at light-medium throttle up hills etc.

One fix is to weld a divider into the 'twin turbo pipe' to smooth the airflow from the two turbo outlets. I am yet to get that done.

Some say they get it tuned out?

Well, I'll be seeing you soon then Chris!! That's exactly what I want to get done.

Another piece of the puzzle done now. Got the rims I wanted to get that 'look'.

Genuine Volk CE28N 18x10.5 +18 in gold. Got 275 35 rubber on them. Next plan is to lower it 20mm.

post-12712-0-35439800-1296999809_thumb.jpg

post-12712-0-86066100-1296999821_thumb.jpg

Well, I'll be seeing you soon then Chris!! That's exactly what I want to get done.

Another piece of the puzzle done now. Got the rims I wanted to get that 'look'.

Genuine Volk CE28N 18x10.5 +18 in gold. Got 275 35 rubber on them. Next plan is to lower it 20mm.

Care to tell where you sourced the wheels from

CE28N looks the bizz too

Ya, it needs some lowering badly

Well done Sean, the car looks tuff with the wheels.

I'm kinda regretting selling them now....

You running any coilovers??

Also have you contemplated colour coding the spoiler between your bumper and lower lip?

It would give it a more aggressive look and seem like the car sits lower aswell....

Very nice car mate, credit to you......

Yep, got em off JAGR33. Wanted them wheels for a while and kept eyeing them off.

Thanks again Jack!! They are a bloody nice wheel! I will not scratch or abuse them, and I'm also going to organise center caps too.

Also importmonster seems to get in some hot wheels in every so often too. They had a different set in silver a while back, but I didn't have the dough at that time!

Still the stock Vspec coilovers, but it will get something good, in time. I have a set of HKS coilovers ready to go, but I don't want a harsh ride.

Was thinking about colour coding the mid lip but I'm still partial to the black look. I do have the paint ready to go though!

Spent a day on the GTR, fitted HKS suspension and brake deflectors. Rear seat scratched the interior trim so I'm :domokun: at myself for that, scratched pretty bad so may have to get another trim panel.

Also pulled of front lip to colour match to car so I will take pics of new stance once finished!

post-12712-0-00628200-1297509161_thumb.jpg

post-12712-0-39376900-1297509178_thumb.jpg

post-12712-0-91237200-1297509421_thumb.jpg

Yep, it's cheaper than getting discs at the moment lolz.

LH rear coilover is knocking, so that was a great buy.... :angry:

Painted the lower lip, but the paint I mixed was probably the wrong tin as it's slightly pink? I'll just take it to a painter next time I have it off.

Pics soon.

Ha ha, yeah, damn guys wanting engines built.

Hey Steve-o, looked like you got into some trouble on the day lol. When I get the car sorted I'll go. Would of loved to go, but no cash and was working on the R :) I think I like the lip painted, fills it out!

This is lowered to around 115mm on front lip, I like!!

post-12712-0-20962400-1297679604_thumb.jpg

post-12712-0-60989700-1297679851_thumb.jpg

Hey Sean

What did u do with painting.. you go the whole compressor and gun?

I know how to spray but not how to mix.. so i might require your mixing skills if i hire a booth and do a respray later in the year

That looks heaps better!! Middle lip painted white and with the coil overs makes the car look much lower to the ground.

Top job, well done.... :thumbsup:

P.s are they CSC brakes?

Thanks, I love the stance but not the ride quality. Yeah they are CSC 356mm discs with 6 pots. Need new discs though, these are stuffed. Got to find out who sells replacements.

Re spray Dave? Your car looks fine?!

I wore the sperm suit on sunday and whipped out the air compressor and my spray gun. Mixed up DG 2PAK white that I had colour matched, with hardener Added thinners but I probably didn't need to. Primed the lip then 800 sand to make it smooth, then 1 light coat, then 2 coats of the white. Nice and smooth/glossy straight out the gun. Fitted it that arvo.

I'm still learning, but I'm pretty good at painting now :thumbsup: Practiced a lot with a spray can when I didn't have a compressor and gun.

Prep work is still the most important, little things like wetting the floor etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...