Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

im a bit confused,

my car has 2 BOV's it has the stock one which goes back into the intake and i have a HKS SEQ as well? i have wound the boost up to 11.5psi, should i be removing the stock bov?

hey Ash

I have the same prob as u...they left my stockie on wen the put the HKS one on..

if u find out wat to do can u tell me plz :)

thanx man

SXCSKY i have the exact same setup as you! :) same place and all,

i don't know if u loose power, i think thats only if it leaks, but how do you find out?

Hey Ash...i dunno how to find out...im takin it to UAS 2day and see wat they say

Tell us if u find somethin out

cheers ;)

howdy... my skyline aint got a BOV.. but has a POD... anyways... i want a BOV on the beast and by what i have read... being a girl and all... a BOV basically could lengthen the life of ur turbo... any one object? or has reasons y i shouldn't invest in one??

u dont want Atmo bov and plumbback. coz the plumbback is known to leak over certain boost levels which will lose u boost. thats one of the reasons u upgrade to HKS or watever. as far as pressure goes, it wont make much difference since its just doubling the release of air which is good. some going back in will act like them hybrid bovs too stopping it stalling or watever coz it stil lgets air back to the AFM. but it will make the HKS quieter too probably coz not as much air coming out of it.

id remove the original i reckon. just block up the places where it goes in i.e. put blockers up any pipes that are left from it's removal. easy.

no need for 2! or yeh u could also just jam it shut somehow but easier to take it off and fill the holes with something and clamp it up nice n tight. :)

R33NismoGirl - Your car has a blow off valve standard. Has it been removed?

Ash - there is nothing really wrong with having 2 BOVs. (GTRs have 2). The factory one would have been left in place to help with maintaining the factory idle characteristics. The 2 valves will flow much better than 1 and will therefore work more effectively.

Cameron & Ash - There is a thread on these forums about modifying the stock BOV that you may find interesting.

R33NismoGirl - Your car has a blow off valve standard. Has it been removed?

Ash - there is nothing really wrong with having 2 BOVs. (GTRs have 2). The factory one would have been left in place to help with maintaining the factory idle characteristics. The 2 valves will flow much better than 1 and will therefore work more effectively.  

Cameron & Ash - There is a thread on these forums about modifying the stock BOV that you may find interesting.

Thats cause gtr's have 2 turbos :D hehe

yer i've herd the bov mod works good.... ?

Well I am going to disagree with a few people here then...

recently I installed a pod, K&N tapered with chrome end...have had it for about as long as they have made this model (used to be on one of my dads many drag engines) anyway it sounds awesome, good suction noise and scares the bejesus out of the od commo driver...

You CAN hear the standard bov, and it is working fine, however I have replaced the standard BOV with a GFB stealth and all I can say is giddy up...

At full plumb back it seems to hold and come on boost quicker, I am aiming to dyno to prove my point unless someone beats me to it, has already been proven on a s15...

add to this at FULL atmo the car STILL idles like factory no backfiring, no hiccups nothing, its all a matter of a bit of spring adjustment. This is only factory boost (9psi??) and I am very happy...espcially after I replaced the BOV gasket with a new one as the old one created a high pitched squel which was in fact a boost leak....

hey guys

Ok nowim confused 1 dude says its ok to have a stockie BOV with ya BLITZ BOV ...and another says seal it....and another says just switch the vacuum hose over to the BLITZ BOV .....ok guys so wat should i do then .....????? plz someone tell me way to many opinions on this subject :headspin: ....oh yeh can someone help me with the reason y i get a small backfire wen after the BOV goes off????

thanx guys :D

as far as i can see i dont have one... but i have been tol i do but it dont make noise?! i dunno i new to skylines only had it for 10 months & still learning more everyday... if someone caould give me some more info on where to find to standard BOV that would help other than that i am lost... thanx for the tips guys... i am thinking NOT 2 worry about getting one. i just got my beast back after a cracked head & head gasket lol shit happens... damn trucks!

If you have a stock airbox you won't hear the stock BOV...

i havn't got a pic to post but if you look at the pipe where the air inlet connnects to the intake manifold (near the firewall)... you'll see the stock bov with a black rubber hose coming off it.... sorry, i'm not very good at explaining but if someone can post a pic that'll show you where it is....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...