Jump to content
SAU Community

Recommended Posts

I have just put in the latest drag version of the os giken box, Something my tuner says his never seen before he said it was a new type, The gears were huge he claims, Alittle noisy but im not worried. Neways Now this happens very rarely usually in the first 3 gears, As im booting it a miss a gear on the odd moment and the revs go through the roof 8-9000rpm, Is that harming my engine? I have stock internals but everything around i have modded cams, injectors, pump, PFC bla bla and the rest , only thiing i need now is the internals done. But neway i just feel like i've hurt the engine in someway and i get realllly shitttyyy when it happens as this car is my pride and joy, What harm am i actually doing when this occurs?

Your motor should have a rev limiter still so damage to the motor would not be something crazy, although standard oil pumps and rev limiters dont go hand in hand with the RBs.

Another thing to note is that when you do that you are flaring your clutch, this will kill it alot quicker than it should.

Its all timing, it shouldnt be an accepted out come that you 'missed a gear'. Try driving fast in slow motion, sounds ridiculous but it works.. After a while ull get into a nice groove.

GL

Ty 9500 on a stock engine with N1 turbs! then you are getting somewhere, accidently saw that when I first got my 32, had fcon v pro computer.

I never had any troubles when it went that high. Just don't limiter bash, that kills oil pumps!

Ty 9500 on a stock engine with N1 turbs! then you are getting somewhere, accidently saw that when I first got my 32, had fcon v pro computer.

I never had any troubles when it went that high. Just don't limiter bash, that kills oil pumps!

haha hates when it happens! Nah i never limit bash

Edited by GTRAAH

GTRAAH you should clarify what box you've got.

OSGiken make more than one gearbox option.

I'll guess you have a 5spd kit that goes into your standard gearbox case. When you say latest drag box, people will assume the OS88 is what you've got

Sorry to hijack but kinda on topic, with regards to limiter bashing. Would a launch control like the gizzmo set at a much lower rpm say 4-5000rpm put stress on the oil pump? If someone can explain why as well that would be great

cheers Pat

LOL i do know how to Drive!! no one is perfect mate it happens! 20k??? wtf no yes i think n1gtr got my drift its 5spd kit that goes in the casing Mark at hills said there was a street version and drag version and i have the drag version. He said he has never seen this one before must be new.

LOL i do know how to Drive!! no one is perfect mate it happens! 20k??? wtf no yes i think n1gtr got my drift its 5spd kit that goes in the casing Mark at hills said there was a street version and drag version and i have the drag version. He said he has never seen this one before must be new.

yeah dude the gears in them are pretty massive ive ordered the 5 speed drag version myself

did u get it with the input shaft as well??

there rated at 800hp i think so u shouldnt break it with a stock motor i dont reckon

I was told they can withstand 1200hp this guy they know had the same box and he has done PLENTY of 9 sec runs in it, and still solid. Is the gearbox meant to be alittle notchy i would of thought that its like a brand new gearbox as in perfectly smooth gear changes like a brand new car, I dont know input shaft?? is that the main shaft? if so i put an r33 gtr one in there they are alittle stronger.

I was told they can withstand 1200hp this guy they know had the same box and he has done PLENTY of 9 sec runs in it, and still solid. Is the gearbox meant to be alittle notchy i would of thought that its like a brand new gearbox as in perfectly smooth gear changes like a brand new car, I dont know input shaft?? is that the main shaft? if so i put an r33 gtr one in there they are alittle stronger.

A correctly built OS box should be nice and smooth...

Yeah they are rated at 1200hp with a 9k rpm shift limmitation- OS recomends 800hp

The input shaft is the splined shaft sticking out of the front of the gearbox. It transfers the rotational torque from the motor/clutch to the main shaft in the gearbox. These are a "weak" link for high hp GTR's. Unless your planning to run 400rwkw or more- it's not needed.

The OS gearsets are designed for the later r33 GTR box.

J.

A correctly built OS box should be nice and smooth...

Yeah they are rated at 1200hp with a 9k rpm shift limmitation- OS recomends 800hp

The input shaft is the splined shaft sticking out of the front of the gearbox. It transfers the rotational torque from the motor/clutch to the main shaft in the gearbox. These are a "weak" link for high hp GTR's. Unless your planning to run 400rwkw or more- it's not needed.

The OS gearsets are designed for the later r33 GTR box.

J.

Are input shaft and main shaft the same thing? i think it did come with the input....... Well i know that when i snapped 3rd on my stock box he said something wedged itself between the main shaft and put smal hairline cracks in it, he said to me that this shaft doesnt have force on it so it doesnt ever brake he said he had one from an r33 so he used it. The only reason i broke it is because of the gear braking and wedging itself in it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...