Jump to content
SAU Community

When A Mate Spends 6 Hours Detailing Your Car

NickR33

By NickR33,
in Victoria

 Share

Recommended Posts

NickR33 Grand Master

NickR33

Posted
Posted

A mate went to town on my car with a bunch of Final Inspection products, a clay bar, a buffer, a lot of masking tape and a toothbrush! Here are the results... sorry about the garage but it was raining and dark by the time we finished... well by the time he finished... I cleaned a wheel at some point... I think

really impressed by the wheel cleaning product (very tricky to clean around the bolts on 2 piece rims) they are now cleaner than I've ever seen... also the sealer he used at the end is makes for a ridiculously smooth finish, has to be touched to be appreciated

polished the headlight plastic as well, they look brand new... you know someone is keen about detailing a car when he pops out your indicators and windscreen washer jets!

overall a pretty good result for stock 14 year old paint

feel free to comment so that I can reply and have an excuse to waste time at work :)

gallery_7369_282_114597.jpg

gallery_7369_282_321108.jpg

gallery_7369_282_309321.jpg

gallery_7369_282_205569.jpg

gallery_7369_282_53637.jpg

bit of photoshop love

gallery_7369_282_29109.jpg

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Cowboy1600 Grand Master

Cowboy1600

Posted
Posted

That looks amazing.

Can you get your mate to post a full list of products he used and perhaps a bit of a run-down on process?

NickR33 Grand Master

NickR33

Posted
  • Author
Posted

I'm not 100% on exactly what he used but it was all Final Inspection stuff... the wheel cleaner is a must if you have tricky to clean wheels... he hit them with the cleaner (left it sit for 10 min) and a paintbrush then just hosed it off... I wish I had taken a pic of how dirty they were before

http://www.finalinspection.com.au/store/pr...rf511nmhgbd3e21

he used an orbital buffer as well and was saying that the pads you use are really important... but not sure exactly which ones

I'll see if he has time to jump in here and give a quick run down of products and process

I did give him some cash to cover his costs but it would have cost more had a taken it to a handwash/polish place

some more photoshop love, this is my new desktop:)

gallery_7369_282_30226.jpg

NickR33 Grand Master

NickR33

Posted
  • Author
Posted
Looks good Nick! Cleanest it's been since Auto Salon I bet! :blink:

yeah Nathan kept the paint in really good condition... Daz couldn't believe how straight it was for a reasonably old car... it only needed one pass and came up great.... recently had the front bar painted by Micolour and its perfect... the only place it needs a bit of TLC is the rear bar

Its never lived outside and came over from Japan when it was basically new... I think the cars that have spent the majority of their lives in Aus have better condition paint/bodies, as long as they are kept under cover etc

krzysztof Mentor

krzysztof

Posted
Posted
looks shmick

what did he use on the headlights?

any polish will do the drick. i had some autoglym super resin polish.. its just a fancy name for ordinary polish.. about 5 mins on each and they come up good as new.

i probably wouldn't use paint doctor on them i think that would be little too harsh..

car looks the goods mate my cars been in the shed for 2 months now some claying and so forth definately on the cards..

NickR33 Grand Master

NickR33

Posted
  • Author
Posted

wheels are 10in, +20 offset... could even take some spacers too, gotta love GTR guards

the hella flush boys would not approve of my wheel/guard clearance but much more practical at this height... front lip on GTR is impossible not to damage if car is very low and it gets driven everyday

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...