Jump to content
SAU Community

Recommended Posts

Hey guys sorry if this question has been asked before i have been doing some research on HID's iv been wanting to get Bi-Xenons (Hi/Low Beam) installed on my Skyline but my headlights don't contain any type of projectors or reflectors they are just standard S1 R33 headlights.

My question is how many of you are running HID's on your Skyline without Projectors / Reflectors ? etc... and have you had any problems with oncoming traffic (other road users) flashing there lights at you or Cops (defects). I was looking at getting 6000k but a lot of people on this and other forums say that without proper headlights the HID's create glare into oncoming traffic which makes them Illegal to have installed.

Cheers guys any help on the issue is appreciated if this question has been answered directly before link me to the thread i have tried searching but i don't believe it has been asked before.

Edit: i have also read about retrofitting projectors it seems like a decent size job to do but i am not really that committed to getting HID's if that's the only option i have.

Edited by DarkRyda
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

i hate all cars with HIDs, they do blind people and if you have HIDs on in the rual areas, i don't turn off my high beams (cuz i cant see shit).

HIDs = too bright.

out of every mod you can do, this is really one of the few mods i would actually complain about, simply because it affects me.

edit: it might depend on the HID but all too often they blind me and you really can tell the difference between normal and HIDs. headlights are designed to be short ranged, i don't understand this whole phase of super bright headlights, its the exact opposite of what they are designed for.

Edited by Peter89

Thanks for the input buddy my headlights are using Phillips Crystal Vision Ultra's atm but they just aren't doing it for me i am not looking to upgrade my headlights to HID for the look or just to add another mod to my car its mainly for distance/vision/visibility reasons hence the choice of 6000k HID's.

if you want a light that gets you better/further vision, ditch the crystal vision. for starters they aren't ADR approved, secondly, the more white/blue the light the duller it is. so if you go back to something like the phillips blue vision or even the power 2night bulbs you will get more light, however it won't be as ricey.

There's no point in switching to Blue Visions because they have the exact same output as my current bulbs 4000k i have Crystal Vision Ultra's (only sold in the US) the Australian version of the Crystal Visions are 4300k anyway i don't think switching to another halogen bulb will make a difference, my current ones don't look ricey at all there a soft white.

don't do HIDs on an R33. reflector headlights designed for halogens spill too much light, I haven't seen an R33 with HIDs whose owner doesn't deserve a backhander for the glare it causes other road users.

There's no point in switching to Blue Visions because they have the exact same output as my current bulbs 4000k i have Crystal Vision Ultra's (only sold in the US) the Australian version of the Crystal Visions are 4300k anyway i don't think switching to another halogen bulb will make a difference, my current ones don't look ricey at all there a soft white.

i recently fitted blue visions (4000k) in mine. theyre very white. they give a nice clean light, fairly bright. no complaints from me.

I thought so previous posts are talking as if the normal globes are just as good as HID's they simply aren't : ( have you had any troubles with other road users ? or do you have projectors fitted? also what Kelvin temp did you select.

Edited by DarkRyda

Mine are 6000K, standard series II headlights. I have them pointed a bit down so it doesn't blind people. They are bright and my mates don't like driving in front of me but they say it isn't as bad as some peoples, their problem not mine :D

Sweet thanks for all the reply's : ) much appropriated SAU members are always here to lend a hand thanks guys. Im just wondering whats a good set of HID's besides the Phillips ones because i don't wanna spend $500 on a set of HID's looking at anything $250ish or under ill be sure to get them properly installed : )

Hey guys sorry if this question has been asked before i have been doing some research on HID's iv been wanting to get Bi-Xenons (Hi/Low Beam) installed on my Skyline but my headlights don't contain any type of projectors or reflectors they are just standard S1 R33 headlights.

My question is how many of you are running HID's on your Skyline without Projectors / Reflectors ? etc... and have you had any problems with oncoming traffic (other road users) flashing there lights at you or Cops (defects). I was looking at getting 6000k but a lot of people on this and other forums say that without proper headlights the HID's create glare into oncoming traffic which makes them Illegal to have installed.

Cheers guys any help on the issue is appreciated if this question has been answered directly before link me to the thread i have tried searching but i don't believe it has been asked before.

Edit: i have also read about retrofitting projectors it seems like a decent size job to do but i am not really that committed to getting HID's if that's the only option i have.

Don't do it bro. Read this

http://www.danielsternlighting.com/tech/bu...onversions.html

I've been reading about HID's too. One day when I have an oven that actually works I'm going to open up my headlights and put in those FX-R HID retrofit ones from 'theretrofitsource'. All up including projectors they are going for less than $500 currently.

Google it, there's a guide on how to do it from one of those UK skyline forums.

Either that... or i'll buy cheapass $80 HID projector kits off ebay and retrofit since the car is getting old and is a real moneypit haha

My previous car was a mazda astina I had ebay $60 HID's in it with the stock projectors and it was perfect :P

I would not recommend HID's in a reflector type headlight, glare like anything.

Thanks for the Info Dan iv read a lot of pros/cons about HID's its a pain i just want some decent lighting at night and halogen globes are just not producing that for me! : (

Just get a set of bulbs for like $100 and chuck them in. Yep they are illegal and not perfect in our headlights, so is 90% of the shit on our cars, who cares. Adjust the headlights a bit so they don't blind people as much and you'll be fine. They are so much better than a normal globe and Skyline lights to begin with are pretty crap at brightness. The first thing i did to my motorbike was to put a HID bulb into it as the stock bulb was like holding a candle in front of the bike and was down right dangerous. Best bloody thing I did to the bike.

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...