Jump to content
SAU Community

Recommended Posts

I've done lots of searching both here and on other forums so I apologise in advance if the correct answer is out there.

So far I've found quotes that the standard R34GTT NEO injectors are 340cc,350cc,370cc or 380cc.

Can anyone say for certain what size they are? I think that I might be reaching the limit of mine as I have injector duration of 20-22m/s at full throttle.

My S2 Stagea is running FMIC, std turbo (soon to be replaced with hybrid) 80mm cat back,silenced decat,apexi induction kit, Gizzmo EBC set at 0.75bar boost and Walbro 255lph fuel pump.

Edited by DeanR33
Link to comment
https://www.sau.com.au/forums/topic/324899-r34-gtt-std-injector-size-please/
Share on other sites

well the r33 injectors are 370cc and from what i am aware the r34 is the same size (not 100% sure on that though).

if you are reaching the limit of the injectors with only 11psi then there is something going on. either your fuel pump is stuffed, fuel filter is blocked or the fuel pressure reg is stuffed. not sure what 20ms is in % of injector duty. generally about 250kw is the max for stock injectors.

I'm maxing out my nismo 480cc's at 240kw, so i'm pretty sure my stock 370cc injectors would not have got that far...

Yes 34 is definetly 370cc!

There's definitely been people on this forum finding 220rwkw on the standard 370cc, but I'd understood that was the limit without increasing the base fuel pressure. I'd also always understood the nismo 480cc injectors to be roughly good for 480hp at the engine and 280+rwkw?

(480hp = 357.9kw .. take 20% drivetrain loss - 286.32rwkw)

Can anyone else confirm their experiences?

I always thought that they were 370 or 380cc, but I posed the same question on Skylineowners.com and someone on there swears that they are either 330 or 340cc, which amazes me considering the regular rb25det ones are known to be 370cc.

If they are 330cc then I must be getting pretty close to needing uprated ones.

To be honest with all the knowledge on here I thought someone would be able to give a definate answer.

Curious as to what these are worth second hand?

And I have read that the nismo 480cc running around 280rwkw on safe tunes in the power thread. Well I hope that is the case as that's what I have bought to support my GT3071R upgrade :thumbsup:

Well, i had these 480cc's running with my original turbo, then when i upgraded to a hks 2835 my tuner said they was my limiting factor for not pushing more boost through (only tuned to 13psi)....

chrisr34gtt that was pretty much the reason i got them too, i was aiming for the 280kw mark and thought it would be achievable with those injectors. Will now have to fork out for new ones if i want an increase! :P

  • 3 years later...
  • 2 weeks later...

The GTR's run 11mm top Orings, and a square large lower Oring. They won't fit without some buchery. What are you after size wise?

The NEO injectors were carried over into the VQ25det's also, as they are exactly the same.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...