Jump to content
SAU Community

Recommended Posts

yo

I’m importing a 97 gts-t skyline spec II type m, I wonder if anyone who has imported before had any problems and/or know of anything I should watch out for? Some of my friends have said the stereo will probably go missing? Seems like some sort of urban myth to me, could the wharf guys really get away with that sort of behavior? Also is it likely it will get dented or scratched while on the ship?

Yeah so any advice, opinion or experience would be greatly appreciated.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/
Share on other sites

If it is a good stereo they usually put this anti-theft tape across it. I imported my own car and it had guages and stuff - nothing went missing at all. But other people have had stuff go missing. Your car isnt likely to be dented to scratched - they pack the cars in super tight on the ship, but they are careful. Your car will be pretty dirty as well when is comes in. I have only ever heard of the stuff going missing on the Japan end of things, not from when it arrives in Australia.

As with anything - this is a risk you're taking. I didnt have any problems but other people did... you can look at insurance on the ship... but I am not sure about how that works

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-654388
Share on other sites

Mine was in a container too....

Good idea if you dont want little stuff to go missing, be prepared for some things like scratches and parts a little different than was you originally thought, some of my stuff was different brands to that I was told and had a few niggling mechanical probs not mentioned

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-655682
Share on other sites

personal experience:

had car broken into on wharf in japan - door locks ****ed, doors scratched.

needed to get it on a boat - due to the old scheme expiring, and it was sent with no door locks or handles, but the wharf insurance covered the repairs.

locks and handles posted to me from nissan.

somewhere along the way, my car drove an extra 1000km. it had the drivers side floor mat, and gear knob (small but frustrating items) go missing, and the front right 1/4 panel graunched.

on the upside, i found it had an obscure but expensive jap brand exhaust on it and an HKS AFR (budgo version of the afc). plus the rims on it which I thought were nice turned out to be VERY nice.

oh, I also found the car had a bown gasket at the turbo. very expensive OR time consuming job to fix. this could have happenned in between buying the car and shipping it, but eh, I dunno.

at the end of the day it was probably still worth it vs. buying a car from a yard here. would be even more so at the moment with the Aus vs. Yen.

the fact is that, if you're like me, you will probably end up very frustrated and angry at the process and the waiting. just remember the savings and why you're going through it, otherwise you'll be over the car before it gets here.

oh, yeah, having said that, once it's on the road and rolling, all the hassles that spanned over 4 months will roll away into about 10 seconds of memories and you'll love it.

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-656312
Share on other sites

personal experience:

had car broken into on wharf in japan - door locks ****ed, doors scratched.  

needed to get it on a boat - due to the old scheme expiring, and it was sent with no door locks or handles, but the wharf insurance covered the repairs.

locks and handles posted to me from nissan.

somewhere along the way, my car drove an extra 1000km. it had the drivers side floor mat, and gear knob (small but frustrating items) go missing, and the front right 1/4 panel graunched.

Zanda, Just a FYI.

The only driving that takes place here in Perth is from the Container to the Quarantine wash area and then the yard.

The yard is pretty busy but after having spent some time down there waiting for family to finish work I doubt that extra KM's occured here in Freo.

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-657064
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...