Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Has anyone had experience with the Bee-R carbon door cards?

Pricey but they look good quality. I am a little concerned they won't sit as flat as a simple aluminium skin, and might somewhat dictate side intrusion options for my cage builder. They look to have a similar shape to the factory 32 skin just without the armrest, pocket and speaker.

http://www.rhdjapan.com/bee-r-carbon-inner...-s15-ae86-54999

Yeah tell me about it - any local alternatives that you know of? I am sure I could sink the $1200 odd bucks somewhere else a little more useful.

Saw your beast out at racepace the other week - one of it not best looking GTSt around :)

Do you guys have cages? I do in mine and door trims just don't fit any more. I padded the intrusion bar and glued a soft backed carpet to the door.

A week or two off putting a full cage in. Stock trims definitely won't fit with side intrusion once its in!

Has anyone had experience with the Bee-R carbon door cards?

Pricey but they look good quality. I am a little concerned they won't sit as flat as a simple aluminium skin, and might somewhat dictate side intrusion options for my cage builder. They look to have a similar shape to the factory 32 skin just without the armrest, pocket and speaker.

http://www.rhdjapan.com/bee-r-carbon-inner...-s15-ae86-54999

I was looking at getting them when my car was in the panel shop, the price is each, so very expensive! :) IF someone can get a pair at that price then they are a little more attractive

thats not very expensive mate.

mine are worth over 2 grand

sunline racing japan mate.

there getting fitted shortly as soon as my carbon doors arrive :D

still have a nice streetable look to them as well, unlike the bee r ones

post-31553-1278559449_thumb.jpg

Edited by GUN_METAL_GTR32

They do look nice - they are definitely aimed at street cars though - far more intricate than the Bee-R ones which are aimed at caged cars.

The bottom of the sunline ones will interfere with cage side intrustion. My car is going dedicated tarmac rally and won't see the road so I want something basic and flat that won't interfere - Bee-R are the closest I have found in carbon short of just screwing a carbon or aluminium skin on to the door. $1.2k probably better spent on important things like tyres - saying that I will prob still get the Bee-R ones :)

Can't see the point of carbon door cards, may as well buy carbon doors and put in a thin aluminium skin or carbon fibre sheet.

Only thing is racing regs - tarmac rally panel modifications generally not allowed so have to run the standard doors. Carbon fibre sheet might be the go though.

Cool if you have 2k to spend on door cards, but in my books there is no way i can justify that amount of money to run door cards. Hell get some thin alcantara ro look alike material and just glue it to a raw door inner. Hell, way cheaper and lighter and more clearance....also give you the raw race car rattles :D

Saw your beast out at racepace the other week - one of it not best looking GTSt around :)

Cheers, its because I have not been around to bash it off tyres or set it on fire at the track the past two years :)

Can't see the point of carbon door cards, may as well buy carbon doors and put in a thin aluminium skin or carbon fibre sheet.

i have carbon doors on the way with a couple other body parts

They do look nice - they are definitely aimed at street cars though - far more intricate than the Bee-R ones which are aimed at caged cars.

The bottom of the sunline ones will interfere with cage side intrustion. My car is going dedicated tarmac rally and won't see the road so I want something basic and flat that won't interfere - Bee-R are the closest I have found in carbon short of just screwing a carbon or aluminium skin on to the door. $1.2k probably better spent on important things like tyres - saying that I will prob still get the Bee-R ones :)

my car is caged and they fit with my stock door cards so i dont see why these wont fit with it.

Cool if you have 2k to spend on door cards, but in my books there is no way i can justify that amount of money to run door cards. Hell get some thin alcantara ro look alike material and just glue it to a raw door inner. Hell, way cheaper and lighter and more clearance....also give you the raw race car rattles :D

Cheers, its because I have not been around to bash it off tyres or set it on fire at the track the past two years :)

thats fair enuff i guess, but each to there own i like carbon lol

Thats all ive managed to do so far. Dont really know how far to cut. :whistling:

You can go a lot further than that around the edges. even to the point of putting the door handle on the skin and cutting the steel away.

Also swiss cheese the end on the latch side.

It is a dedicated track car isnt it ??

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...