Jump to content
SAU Community

Recommended Posts

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

We noticed a massive increase in midrange switching from PowerFC to Nistune (same tuner) on an S15. Nistune is ftw.

should be no "real" difference, but ultimately there will be a smidge unless you swap each timing mark across and load point exactly (same with fuelling).

We have done a few swaps between the two as well and to TBH its around 50 / 50 and always within a smidge of each other.

bout the only ecu i find has bigger variances is the Microtech due to the way it manages timing in the software.

Getting Nistune(d) by Trent this Saturday... Can't wait!!!!!!!!

Had a mate go to Chasers (Paul) last week and he seems to be happy with his tune. Though I've heard more bad about Chasers as well. Never heard a bad thing about Trent and his tuning abilities :D

Edited by blk15
should be no "real" difference, but ultimately there will be a smidge unless you swap each timing mark across and load point exactly (same with fuelling).

We have done a few swaps between the two as well and to TBH its around 50 / 50 and always within a smidge of each other.

bout the only ecu i find has bigger variances is the Microtech due to the way it manages timing in the software.

We had three different tuners tune the PowerFC on the S15 - Rob @ Sabaddin, Sam @ Dr Drift & yourself. No-one got it right. You might remember the car - stock looking white jap-spec S15 - made 245rwkw. A bit's changed now though.

Now with the Nistune is runs like a factory car. Cold start is perfect, return to idle after backing off throttle is perfect. The car's also making more peak power on the same boost. Why was the PowerFC so bad? It used to idle hunt like crazy, cold start was terrible, return to idle was terrible. That's all gone. Unless it was just a 'bad' PowerFC, I would never go near one on an SR. That goes for all the DET-conversion Pulsars I've been around with PowerFC's as well, same rubbish idle.

We had three different tuners tune the PowerFC on the S15 - Rob @ Sabaddin, Sam @ Dr Drift & yourself. No-one got it right. You might remember the car - stock looking white jap-spec S15 - made 245rwkw. A bit's changed now though.

Now with the Nistune is runs like a factory car. Cold start is perfect, return to idle after backing off throttle is perfect. The car's also making more peak power on the same boost. Why was the PowerFC so bad? It used to idle hunt like crazy, cold start was terrible, return to idle was terrible. That's all gone. Unless it was just a 'bad' PowerFC, I would never go near one on an SR. That goes for all the DET-conversion Pulsars I've been around with PowerFC's as well, same rubbish idle.

Yeah i do remember now, just after we opened it had a real bad case of PFC 'itis.

Most of the rubbish idles on pfc's are cause of the intake pipe and afm position..... but some pfc's dont care either way.. its weird, i think build number has a lot to do with it as the early serial numbers are way worse.

eep i hope my rb26 doesnt do that bad idle when i get pfc on :(

getting my exhaust on today.. cam gears / service done by GT hyper then i'll give you a call Trent :thumbsup:

Its an SR20 thing :P turbo snout and airbox are too close and custom intakes pipes create bad reversion older version PFC's hate it.

Car got tuned @ Status today!!! Very friendly/helpful, would definitely recommend them. Below are the results:

Year/Model: 01 Spec S (adm)

Engine/Size: 2.0 SR20DET

Turbo: t28 bush bearing

Power @ boost level: 185rwkw @ 15psi

Torque: 362.5 Nm

ECU: Nistune

Modifications: gktech fmic, fujitsubo exhaust, apexi intake, walbro fuel pump, turbotech mbc

My car initially made 162rwkw @ 14psi but was pinging its head off @ 14.5 AFR (massive black smoke at end of exhaust). I was really shocked and worried as trent could see.

But all is good now with the tune, sits nicely at 12AFR though the coilpacks are on the way out...

scan0002.jpg

scan0001.jpg

You can see it pinging (red)

Car now drives extremely smooth especially down low where it felt like a slug previously. Love the pull at around 3500rpm.

Thanks Trent for saving my engine :D

Edited by blk15
tbh the big thing for me is that Trent is a regular poster on the forums, and is happy to offer free advice, not saying anything bad about anyone else, but that shows a real commitment to customer service.

so when are you coming down from outerspace to get a tune?

meh im still sorting out whether I'll need a replacement dump pipe, gotta get AFM, new intercooler kit to fix up the boost leaks, and then I should be ready to get some Nistune love happening (i did have an insane thought of getting the Microtech retuned but yeah nah).

Don't think I'll be driving it from here to Melb again either lol (roads are like a rollercoaster until Bendigo!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...