Jump to content
SAU Community

R32 Gtst, 5th Gear Is Very, Very Short?

CanadianGTST
 Share

Recommended Posts

CanadianGTST Apprentice

CanadianGTST

Posted
Posted

Greetings, SAU. After lurking for way to long, I have decided to make my first topic, asking questions and just being a general nuisance. My car, a 5mt 92 gtst, seems to be.... Rev happy?

After a recent cruise with a bunch of other skylines, I finally got around to getting an accurate calculation of speed vs rpm on the highway. I was kind of surprised:

5th gear, 4000rpm = 123km/h GPS verified. As far as I know, I have the stock 4.3 diff. However, I also have noisy gears, 1st, 2nd, 3rd, and 5th all have a "straight cut" gear sound. It's not dogbox levels of whine, but it's definitely audible in the first few gears (less so above 3rd gear, as my exhaust is way too loud). From what I've gathered, my highway RPM's seem much higher than everyone else that I know who also drives an r32 gtst around my parts. Did Nissan really gear these cars so aggressively, or do I have aftermarket gearing? As it stands, if I'm booting it and I shift from fourth into fifth, the way it pulls in 5th makes it seem like there really should be a 6th gear, like 5th is purely an acceleration gear, rather than an overdrive.

I don't really mind cruising along at 4000rpm, don't need to downshift to pass. But it absolutely rapes my highway fuel economy! As a result, I tend to do the speed limit on the highway, since it's never any higher than 100km/h until you get out of the city (the city being Vancouver, if anyone's interested).

Thanks for your time ;P

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted
Greetings, SAU. After lurking for way to long, I have decided to make my first topic, asking questions and just being a general nuisance. My car, a 5mt 92 gtst, seems to be.... Rev happy?

After a recent cruise with a bunch of other skylines, I finally got around to getting an accurate calculation of speed vs rpm on the highway. I was kind of surprised:

5th gear, 4000rpm = 123km/h GPS verified. As far as I know, I have the stock 4.3 diff. However, I also have noisy gears, 1st, 2nd, 3rd, and 5th all have a "straight cut" gear sound. It's not dogbox levels of whine, but it's definitely audible in the first few gears (less so above 3rd gear, as my exhaust is way too loud). From what I've gathered, my highway RPM's seem much higher than everyone else that I know who also drives an r32 gtst around my parts. Did Nissan really gear these cars so aggressively, or do I have aftermarket gearing? As it stands, if I'm booting it and I shift from fourth into fifth, the way it pulls in 5th makes it seem like there really should be a 6th gear, like 5th is purely an acceleration gear, rather than an overdrive.

I don't really mind cruising along at 4000rpm, don't need to downshift to pass. But it absolutely rapes my highway fuel economy! As a result, I tend to do the speed limit on the highway, since it's never any higher than 100km/h until you get out of the city (the city being Vancouver, if anyone's interested).

Thanks for your time ;P

4000rpm @ 123kmph? what is it at 100kmph?

  • 2 weeks later...
CanadianGTST Apprentice

CanadianGTST

Posted
  • Author
Posted
and what size tyre

sorry about taking so long to reply :X Car was down and out for a bit while I was doing some stuff to it so I couldn't test on highway. Speed in 5th gear at 3000rpm is 95 km/h indicated, 94km/h on GPS.

Tire sizes are stock HCR32 front and rear, 205/55/16. Pressures are 36psi front and rear, although I don't think that would have an effect at all... is my speed/rpm in 5th gear normal?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

The answer is yes it appears normal 4.3:1 is quite short - would drive me bananas but some people who are more interested in dragging from the lights seems to like it. My Stagea has a 4.1 final drive which I find too short. I am looking to change it for a 3.545:1 off a R34GTR which should be fine when my RB30 is fitted.

jiffo Mentor

jiffo

Posted
Posted

4.1 V's 4.3 makes very little difference, about 2950 at 100 for the 4.1 and an Rb20 certainly feels more lively with the 4.3 ratio.

But the O.P.'s numbers don't add up.

Your first post said 4000 = 123kph, via GPS.

Something is wrong, it's just maths.

3000 at 100kph equates to 4000 at 133kph.

CanadianGTST Apprentice

CanadianGTST

Posted
  • Author
Posted

I'm going to be on the highway tonight, so I'll come back with hopefully more accurate #'s. Perhaps my tach is a bit out as someone mentioned. Since it doesn't sound out of the ordinary, I can't really complain. It certainly is lively in the first three gears :P

Thanks for the replies everyone :)

TurboDoseBro Proficient

TurboDoseBro

Posted
Posted (edited)

Yeah, seems to have very short gears. I find them short even for an NA, would feel even shorter in a FI i would imagine. Mine also sits at roughly 2950RPM at 100km/h (GPS reading). Feels like 4th gear sometimes.

Edited by TyresBro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...