Mv35 Front Wheel Bearing

[ONCE-NA]

Hey! Does anyone know a part number or interchangeablility of the MV35 Front wheel bearing. Ie is it the same an an R34 GTR? If not where can I get one?

-Rod

[scotty nm35]

Just rip one out and take it to CBC, they should be able to help.

[pipster11]

i saw that justjap have a listing on their site for an m35 wheel bearing

for about $200

dunno which one it is tho

[Angus Smart]

i'd say it would be more along the lines of a 350z but do not go out and buy one for a 350 on what i have just said..

[Jetwreck]

i saw that justjap have a listing on their site for an m35 wheel bearing

for about $200

dunno which one it is tho

+1^

go the Just Jap one! You doing it yourself?

[iamhe77]

i saw that justjap have a listing on their site for an m35 wheel bearing

for about $200

dunno which one it is tho

Yep, go with either Just Jap or Nissan (Nissan charge $211 for the part).

Labour to get Nissan to change it should be around the $200-250 mark.

Not the same part as a GTR... not much on an M35 Stagea is used on a GTR.

[ONCE-NA]

Yeah gonna do it myself, and wanted to get the bearing first so the car isn't off the road for too long as its the family car.

[dalton]

Yeah gonna do it myself, and wanted to get the bearing first so the car isn't off the road for too long as its the family car.

just be on the phone to nissan and they have said the wheel bearing is part of the hub anyone know if thats the case for the hup £216 + vat uk pound

[scotty nm35]

Ouch, can a local bearing shop help?

[dalton]

Ouch, can a local bearing shop help?

it is still on the car but will the bearing press out they said it was part of the hub is this the case , or are they just have my pants down with out a kiss frist

[scotty nm35]

I think you need to press them off but I have never seen it done.

[Jetwreck]

The wheels bearing unit unbolts from the upright.....comes out pretty easy but you will need a press and probably an angle grinder with a metal cutter to remove a bearing cover from the wheels hub. Easy job though.....I would put 2 hours on it with a hoist and all the tools.

replacement part is part 8

Edited September 13, 2010 by Jetwreck

[dalton]

The wheels bearing unit unbolts from the upright.....comes out pretty easy but you will need a press and probably an angle grinder with a metal cutter to remove a bearing cover from the wheels hub. Easy job though.....I would put 2 hours on it with a hoist and all the tools.

replacement part is part 8

you are a star

[dalton]

you are a star

Nissan in england are still pissing me about with this bearing anyone know the part number ? our if a another car would fit hear the infinity one should does anyone know ? , this is driving me mad