Jump to content
SAU Community

Recommended Posts

Mine does exactly the same thing. I've seen another R32 RB20DET that also does the same thing.

If you drive it with that flat spot it tends to bring boost up really easy when cruising on light throttle, lots of smoke (black/grey) will be seen in the rear-vision mirror if you give it a little squirt in first or second.

Mine has done it for the last 60,000km's. Nothing to worry about, just warm it up for 3-5mins before driving it. It will also hit boost cut ALOT easier when cold.

When cold and idling if I attempt to raise the rev's slight by pressing the accelerator really lightly the rev's will die and cause the car to start running rough until I either press the accelerator slightly more or take my foot off.

I've also tried everything, there is a possibility of injectors?!?

There is no direct way the R32 ECU can reduce boost when cold as the RB20DET uses the standard plum from infront of the turbo to the wastegate with no solanoids inbetween. The only way be it intended or not is to bring the boost cut in a little earlier. I'm running upwards of 1bar of boost on the stock ecu so i'd say that is my problem.

Mates thanks for the feedback,looks like its reasonably common, although its frustrating when youre trying everything though and nothing seems to improve it,the thing goes like a scalded cat when warm, so it seems he will just have to warm it up first ,just like the first rotaries.

My car does the same thing. If you drive it off gently when cold you get to about 3k RPM and are trying to just go a bit faster it seems to really die in the arse. If you put your foot down a bit or let it struggle there for a few seconds it'll get through the dead spot and come good again. It really doesn't feel nice to drive when cold though! I usually try and short shift just before 3k - it has another not-perfect spot around 2.5k but the warmup period is only about 3-4 mins so i'll deal with it if it's a common fault with the ECU's tuning and not something that can be simply fixed. Contemplated cleaning the AFM but had my doubts it would make a difference.

When warm, I can sometimes feel the same dead spot but it is far reduced. Most of the time I only notice it when it's cold.

I also notice a slight dead spot in the accelerator when warm and idling around in first on and off the accelerator (looking for a car park in shopping centres) Hardly noticible, its so so damn small.

My old VL 5 speed NA 3ltr had it pretty bad, normal street driving you wouldn't notice it, in car parks looking for a park it was a real pain in the arse.

Come to think of it so did my VS V8 5speed. But not when cold.

Has anyone thought of the O2 sensor having problems with its preheat?

I threw my car in diag mode with the o2 sensor flashing on the dash.

As the rich lean rich lean started to flash the flat spot went away.

Also.. Nothing related as the flat spots always been there BUT i've started to loose approx 70km's to a tank of juice. :) I am barely scraping in on 400km's to a tank since the last 15,000km's. Previously I would hit 470km's to a tank then if I did a little bit of 100km/h cruising I could easily break the 500km to a tank.

If it only happens when the car is cold, its probably the ecu trying to stop the turbos making boost whilst the oil is still cold. My car does it, until the oil pressure gauge starts falling the car makes no boost at all, which is a good thing and i dont know why anyone would want to change it.

Today we tried an aftermarket computer on it off our mates car and it was driveable straight away , no flat spot ,he never gives his car stick when cold,but it shows that MR. NISSAN didnt want the car driven till warm,so its back on with the standard one and wait 3 MINS,thanks for the feedback.

contray to previous posts, i HAD a serious flat spot when cold in my car also...

did an ECU diagnostics test and it came up with the code for knock sensor. so i had a look at the knock sensors and one of them was unplugged! so i put it back in, and presto - no more flat spot! worth a try as it only takes 5 sec to see if the plug is in

(note: plugs located just below intake manifold. one is in between runners 1-2 and otehr 4-5. they are green plugs with a white clip that has to go into it)

good luck guys,

Warren.

If it only happens when the car is cold, its probably the ecu trying to stop the turbos making boost whilst the oil is still cold. My car does it, until the oil pressure gauge starts falling the car makes no boost at all, which is a good thing and i dont know why anyone would want to change it.
When cruising and the flat spot is apparent I can hear the turbo spooling & the boost guage is definately reading 1psi or so. It doesn't stop the car making boost. If anything it for some reason makes the car make boost easier and earlier. It feels like the car is sputtering without the missing the car starts to make boost then all of a sudden it comes out of the flat spot and off you go with a bit of fuel smoke behind you.

Upon cruising say 60km/h you watch the boost guage when you feel the flat spot and it will be making boost not vacuum as it should when cruising.

I remember when the car didn't used to do it.. If anything the car used to feel punchier when cold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...