Jump to content
SAU Community

Recommended Posts

Here's Mine!!

This was When it was Stock and nothing done to it!!! My first Deca!!

DSC00513.jpg

DSC00517.jpg

This is After all my Mods done to it.... And how it looks now!! This picture Was taken Exactly 1 year after the previous picture at DECA!! [same Spot]

14082010138.jpg

Deca15.jpg

Deca11.jpg

pfft.. not low enough :(

you are so wrong, it sits perfect..but i get the feeling your werr`e sarcasming

Blags your car looks mad dont lower it or change the wheels...just get rid of those stupid sunvisors,or at least paint them black....

The wheels are great, your new ones better be awesome to look any better than those...What are the new ones??

Edited by Arthur T3

thanks guys!! :(

New look should be even better... and lower!New wheels are Enkei rpf1, just gotta wait as Enkei were out of Stock.

Leigh - Which wheels are your new ones? Looks good!!!

Edited by blags

Yeah what nick said billy :) cheers, they seem to be a couple KG lighter then my volk challenge F-zeros and a little more lighter again then my old GT-Cs that I had as well.

Loving the matt black finish, was tempted to buy XD9s but meh I love concave :(

Yer they look good..

Was considering getting Rota's, someone was selling for $1000 any size but when I got back from overseas he was all sold out, so I though f**k it!

New rims are 18x10.5 +15 and 17x9.5+18

Should look at rotas :( they are good value fark 10.5 on a GTST, I wanted 10.5 but couldn't get them are you sure you can pull off 17s as well as 18s? might look funny on a 350z looks ok cos of there fat ass's we shall see though :)

current 32...

before:

n669476048_430932_8282.jpg

after:

n669476048_1364220_2852.jpg

on hold.

ceffy:

3410603541_dccb1ea799_z.jpg

sits 4cm lower in the back and 2cm lower in the front since that photo. and has a bash plate cos I was sick of my sump copping a beating.

one of my older R32's (I'm on R32 number 5 now)...

1475216129_0cf685951a_z.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...