Jump to content
SAU Community

Recommended Posts

Hi all names josef, used to own a ADM ae86 sprinter... miss that car... here is my 3rd car i have owned (2nd was a holden vectra for daily, and 4th is a gt86 coming from nihon! happy days!)

so onto car things, boring day at work my company is new in melb so not much business, pulled my car into the factory, quick wash n some slight additions to the car and office!

so heres the specs when i bought the thing, was already done i just made it roadworthy... yeah...

mods listing

engine: rb20det (out of r32)

rb20 box manual conversion

rs yamamoto chiped ecu soon to be swapped n tuned

locked 4.33 diff

hight flowed r33 turbo

52mm radiator

twin el thurmo fans

fmic

3" turbo back exhuast with twin pipe magnaflow muffler and high flow cat

bosch 040 fuel pump

catch can

gfb boost tap

new water pump timing belt power steering pump and all belts.

new welsh plugs and rear main

pbr heavy duty clutch.

new clutch master and slave

suspention and brakes:

5 stud conversion

r32 calipers all round

new pads and roters all round

new brake master cylinder

new bc coilovers

new jic front caster arms

new jic rear camber arms

new gk tech rear toe arms

new tie rod ends

front and rear top strut braces

new soft brake lines

interior:

blue dildo shifter

r33 4 door front seats

dash mat

apexi turbo timer

sparco boost guage

tacho does not work soon to be fixed maybe if i can be bothered

sound:

very good pineer head unit

new pioneer front splits

j-car rear splits

jbl 12" sub

j-car monoblock amp

exterior:

HID low beams (replaced to better lights, standardish, these werent to good)

white led packers

window visors

roof wing

latle model chrome grill(might remove it so i dont smash it at track days or somthing... thoughts?)

17" work rims 8" front 9" rear. (paint on wheels pealing, need referb) currently running some stockers

clear front indicators

autech side skirts not on the car, anyone wanna buy em? :/

rolled rear guards

and havnt done anything else to it but got it roadworthy so ill just post some pics i took at work today n some before the clean up.

here are some pics of it chillin at home and the other set of rims i have for it.

20120918_113558.jpg

20120918_113545.jpg

20120918_113615.jpg

20120918_113604.jpg

20121121_092502.jpg

20121121_092440.jpg

20121121_092423.jpg

20121121_092539.jpg

Edited by sprinter666

Hi all names josef, used to own a ADM ae86 sprinter... miss that car... here is my 3rd car i have owned (2nd was a holden vectra for daily, and 4th is a gt86 coming from nihon! happy days!)

Hey Josef!

Welldone with the Cefiro!

You need Panasport G7's :D

8174682790_a045b9a3b9_b.jpg

Like Chris' car.

lol no moneys! still need to fix the thing! besides i rkn kriss's is alot neater have u sean my dozy bonnet n all the dints hahaha, kriss lend me your rimes ;) ill leand you mine :P deal!

Gave her the first wash today to look for imperfections, minor stone chips was all I found!

But definitely needs a good detail. Need some more money's for immaculate reflections to do it lol

8E6kpQd9_original.jpg

Big spec Josef... Forgive me but what are soft brake lines? New flexible brake lines perhaps or a brand?

man no idea was on the receipt/build list i just copied it id just assume their new regular brake lines uness their those reinforced soft lines with wire i them? kinda like fuel lines since last time i did fuel lines on a car they have some kinda braided wire in them for reinforcement etc? just my guess.

ask ross? lol brakes work perfect all i care about :P

p.s.: go shockworks xD people in SAU even know em now epic work! chris n brett are guns! xD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...