Jump to content
SAU Community

Am Performance Blast Pipes

Simon-S14

By Simon-S14,
in Group Buys

 Share

Recommended Posts

Simon-S14 Grand Master

Simon-S14

Posted
Posted

Hi Guys

Im running a group buy on AM Performance Blast pipes. they will be twin 4 inch pipes with angled up tips and a straight cut on the end of the pipe. they will have a single 3 or 4 inch entry (depending on your exhaust diameter) and available in muffled or straight thro configuration,

Put simply they look awesome and are high quality items.

Basically once you have the pipes you'd head to your nearest reputable exhaust shop and get them to weld it on and mount it with a couple of hangers... the blast pipes cant be supplied with welded on hangers due to the many different configurations out there.

I will be doing an order of 5 or 10 if i can get enough interest. But it will work like this.

5 orders, straight thro blast pipes $280 each or muffled $310 each

10 orders, straight thro blast pipes $250 each or muffled $280 each.

rrp is around 380 normally.

I will be running this for one month.. or earlier if i can get all the spots filled. but what i will need is payment and addresses of each order and then they will all be sent out. there will be a start and finish date for this buy. Start will be today and finish date will be 26/08/2010 or earlier if all 10 spots are filled. If i only have enough interest for 5 buys then i will go ahead with that and process the order earlier then the finish date.

People Interested

(updated with interest)

now for some pics so you all know what im talking about.

amperformanceblastpipes.jpg

tndsc04083.jpg

tndsc04079.jpg

Link to comment
https://www.sau.com.au/forums/topic/330404-am-performance-blast-pipes/
Share on other sites
Volk34 Mentor

Volk34

Posted
Posted
Quality stuff guys, I've got a full exhaust from AM Performance on my car and the quality is second to none! Free plug for a great bloke!

+1, im over the moon with the full system andrew did for me :bigthumbsup:

siddr20 Grand Master

siddr20

Posted
Posted (edited)

Interested.

Whats the full width of these pipes and the lenght? Gotta make sure it fits thru the gap in my rear bar. Also shouldnt matter if the exhaust is put on the right hand side un like the pic up above on the left.

Edited by siddr20
Simon-S14 Grand Master

Simon-S14

Posted
  • Author
Posted

hey mate.. doesnt matter if its left or right hand side as they are made symmetrical. width of the two pipes is 210mm and length is ROUghly 560mm.

also have added details up top. only 4 spots left

Import S13 Veteran

Import S13

Posted
Posted (edited)

keen as simon for prob the muffled one.

does the muffled one change the look of it at all or is it internaly muffled?

cheers man

Edited by Import S13
  • 4 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      Borg Warner EFR Series Turbo's V 2.0

      By niZmO_Man · Posted

      Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
×
×
  • Create New...