Jump to content
SAU Community

Cant Get Hold Of An R34 Gtt Turbo Actuator

maddowse

By maddowse,
in Engines & Forced Induction

 Share

Recommended Posts

maddowse Proficient

maddowse

Posted
Posted

hi iv tryed all the wreckers in my area and no one will sell an actuator without the turbo

what my problem is im about to put on a 3" tubo back exhaust but for some reason the owner in japan put a 12psi actuator on so if i put the exhaust on my turbo will be booting too high for it to handle,

does anyone have or know of someone that has an r34 gtt standard turbo actuator that i can buy ?????, oh yeah im melbourne area !!

thanks for you help

maddowse Proficient

maddowse

Posted
  • Author
Posted
Well i have one of Stagea S2 Neo motor,so if that`s any help ,iaam in Perth so if you want it let me KNOW ,

cheer`s Chuckie.

i dont need the motor but if your willing to sell me the turbo actuator ?? that will be great

maddowse Proficient

maddowse

Posted
  • Author
Posted
couldnt you just put in a boost controller?

now my mate sugested that but my actuator is set to 12psi and it will go up to 14 psi when the exhaust goes on (well thats the general outcome with people on this site.but i was under the impressiong boost controller can only up the boost not drop it ???

jrm Veteran

jrm

Posted
Posted
now my mate sugested that but my actuator is set to 12psi and it will go up to 14 psi when the exhaust goes on (well thats the general outcome with people on this site.but i was under the impressiong boost controller can only up the boost not drop it ???

People who put R32 (10psi) actuators on their R34 typically have their boost sit rock-solid on 10psi, so not sure that's true. I suspect it's more of a case with the factory 5psi actuators being overcome by the extra flow of a new exhaust which is why they flow higher, but maybe I'm wrong.

I'd be sticking with the current actuator and seeing how you go - replace it if it becomes an issue.

(And yes, boost controllers can only go as low as the wastegate actuator is)

maddowse Proficient

maddowse

Posted
  • Author
Posted

yeah im going to do that i just want one spare (i know if its boosting to high just dont put the foot down all the way ) so if its too high i can take it easy untill i replace the actuator (if it changes boost )

thanks for the advice people hopefull i can still get hold of one (just incase )

maddowse Proficient

maddowse

Posted
  • Author
Posted
just to be clear

R32 GTST actuator is 12psi

R33 GTST Manual actuator is 7psi

R33 GTST Auto actuator is 5psi

so fare chance i have a R32 GTST actuator at 12psi

so is it un common for a car in japan to have an upgraded actuator but not turbo ??

only reason i ask is because i havent pulled the pipe off to see ?

paulr33 Grand Master

paulr33

Posted
Posted

the common actuator upgrade we see is the R33 GTST with R32 actuator

thats the only common actuator change that im aware of

ie you wouldnt fit a 16psi actuator to R33 GTST turbo as the turbo cant safely flow that much

also look for std actuator specs for BNR34 and ER34 if anyone can measure/check or confirm them ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...