Jump to content
SAU Community

Recommended Posts

lol leave teh lebs alone funky.

but slinky if u get 18s with lower profile tyres the car will actually look worse as the gap from top of tyre to guard will be increased and still look aids.

better off lowering it on stock wheels better over all loook.

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Funky and Slinky are getting along fine :P

A decent set of 18" will go well on a R34, fill out the guards so it sits flush with the guards.

Get a decent set of coil overs and lower it and your all set.

+ it will improve the handling of your car.

Depends on which spoiler you got, R34 4 doors looks better without it unless you got the boot lip spoiler, which adds a nice lip to the end.

Looking at your pics again I don't think your car is a year 2000. Either 1998 or 9. You still have the series 1 font bar and headlights. Also if you had a series 2 sedan you would already have a lip on your bootlid standard and wouldn't need a spoiler

Hey everyone,

I have finally put pictures up on Gallery of my car. I had so many problems getting them to upload, but it's all sweet now.

I suppose it's a GTv because it has HICAS but if anyone else can tell me anything else from the photos, that'd be great. Any hints, comments question would be great.

cheers

Chanz

Yes - It's a GTv. I can see the big brakes up front, which need the 17" GTt wheels to clear them.

You got the best setup for doing a turbo conversion in the future - if you decide.

I don't think you can get an r34 series 2 (year 2000) in a gt. Only a gt-v. That's based on all I've seen

It's the last of the series 1 R34. Nissan introduced the GTv as a limited edition sweetener before transitioning into series 2. All the GTt bits minus the turbo engine...

GTV was like the R34 version of the R32 V-Selection series... basically a GT with all the trick options from the faster models.

The V is for Victory, FYI, as in "We are Victorious in JGTC, fuck you toyota and honda, hugs n kisses, Nissan"

  • 2 weeks later...

I'll leave it up to you guys to decide if you like the spoiler or not, I'll add photos later tonight.

Spoiler is now on (Thanks for the excellent buy, Kye) and my arse no longer looks like I spend all day in the KFC drive through. I know what a few of you guys say about the spoiler but I think it makes the rear look more narrow then it really is.

I had the car professionally detailed on Saturday, so it looks a LOT nicer, and the yellow smog tinge is now gone from my headlights.

I have been thinking about getting it lowered, but I have no idea about the cost, how long it takes, good brand springs (not top of line- I'm a poor uni student but not supercheap auto cheap either) and also someone reputable in the Northern or Western suburbs??

KRYZSUI- I've done a little reading since I read your post, and I believe you are right. Build date was late 1999, wasn't sold/registered until 2000.

BC coilovers for suspension cheap and good product.

Thanks....My knowledge on suspension is very limited, so anything else you can tell me about them would be appreciated.

can any one give me some links?

http://cgi.ebay.com.au/Nissan-Skyline-R33-...rts_Accessories

arnt bc coilovers adjustable and like over a grand? because theres gotta be a cheaper way of lowering. how about just changing the springs? obiously im not taking this NA R34 to the track, 3-3.5 cms lower would be pretty good hey? the wheel arch's would be filled and it would sit lower

any info and/or links would be much appreciated:)

Chantalle

Get a decent set of TEIN Springs.

- http://www.fulcrumsuspensions.com.au/tein.html#TEIN S-Tech Coil Springs

They do a good job.

I would not put King Springs on my Skyline, but that's just me.

yeah but what sort of money am i looking at?

Too much :rofl:

I got my BCs brand new for $1200. I'm guessing they'd be around the same price for a Skyline.

Best value coilovers in my opinion and a lot of people praise the ride quality.

Too much :rofl:

I got my BCs brand new for $1200. I'm guessing they'd be around the same price for a Skyline.

Best value coilovers in my opinion and a lot of people praise the ride quality.

She was talking about just changing the Springs, not the whole setup.

yeah but what sort of money am i looking at?

Roughly between $221 - $500

Hey awesome to see your car up here! Finally got mine back, just need to take some photos now :rofl:

I'm planning to lower my car 30mm on tein s.tech springs. Because mine is older I'll probably have to replace the shocks as well but not sure about yours. They sound like they have a good review from people on here. Bendigo Tyre Centre have them but I haven't been in to talk to them about prices yet.

http://bendigotyres.com.au/index.php?pr=Springs

Thanks for the advice guys. I was talking to my boyfriend about getting it lowered on the weekend and I said I would probably expect to pay up to $1000 to get it lowered, so I'm glad to see it's much less then I was expecting.

Kye-thanks for the link, was very interesting. I'd be interested to see what they would charge for fit and supply.

I'll be waiting to see photos, I haven't been able to see it yet >_< I got mine detailed on the weekend cost $150 to have the exterior only done. I'll be putting pics up once I get a nice day and maybe a cool back drop (that's better then my driveway)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...