Jump to content
SAU Community

Recommended Posts

lol leave teh lebs alone funky.

but slinky if u get 18s with lower profile tyres the car will actually look worse as the gap from top of tyre to guard will be increased and still look aids.

better off lowering it on stock wheels better over all loook.

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Funky and Slinky are getting along fine :P

A decent set of 18" will go well on a R34, fill out the guards so it sits flush with the guards.

Get a decent set of coil overs and lower it and your all set.

+ it will improve the handling of your car.

Depends on which spoiler you got, R34 4 doors looks better without it unless you got the boot lip spoiler, which adds a nice lip to the end.

Looking at your pics again I don't think your car is a year 2000. Either 1998 or 9. You still have the series 1 font bar and headlights. Also if you had a series 2 sedan you would already have a lip on your bootlid standard and wouldn't need a spoiler

Hey everyone,

I have finally put pictures up on Gallery of my car. I had so many problems getting them to upload, but it's all sweet now.

I suppose it's a GTv because it has HICAS but if anyone else can tell me anything else from the photos, that'd be great. Any hints, comments question would be great.

cheers

Chanz

Yes - It's a GTv. I can see the big brakes up front, which need the 17" GTt wheels to clear them.

You got the best setup for doing a turbo conversion in the future - if you decide.

I don't think you can get an r34 series 2 (year 2000) in a gt. Only a gt-v. That's based on all I've seen

It's the last of the series 1 R34. Nissan introduced the GTv as a limited edition sweetener before transitioning into series 2. All the GTt bits minus the turbo engine...

GTV was like the R34 version of the R32 V-Selection series... basically a GT with all the trick options from the faster models.

The V is for Victory, FYI, as in "We are Victorious in JGTC, fuck you toyota and honda, hugs n kisses, Nissan"

  • 2 weeks later...

I'll leave it up to you guys to decide if you like the spoiler or not, I'll add photos later tonight.

Spoiler is now on (Thanks for the excellent buy, Kye) and my arse no longer looks like I spend all day in the KFC drive through. I know what a few of you guys say about the spoiler but I think it makes the rear look more narrow then it really is.

I had the car professionally detailed on Saturday, so it looks a LOT nicer, and the yellow smog tinge is now gone from my headlights.

I have been thinking about getting it lowered, but I have no idea about the cost, how long it takes, good brand springs (not top of line- I'm a poor uni student but not supercheap auto cheap either) and also someone reputable in the Northern or Western suburbs??

KRYZSUI- I've done a little reading since I read your post, and I believe you are right. Build date was late 1999, wasn't sold/registered until 2000.

BC coilovers for suspension cheap and good product.

Thanks....My knowledge on suspension is very limited, so anything else you can tell me about them would be appreciated.

can any one give me some links?

http://cgi.ebay.com.au/Nissan-Skyline-R33-...rts_Accessories

arnt bc coilovers adjustable and like over a grand? because theres gotta be a cheaper way of lowering. how about just changing the springs? obiously im not taking this NA R34 to the track, 3-3.5 cms lower would be pretty good hey? the wheel arch's would be filled and it would sit lower

any info and/or links would be much appreciated:)

Chantalle

Get a decent set of TEIN Springs.

- http://www.fulcrumsuspensions.com.au/tein.html#TEIN S-Tech Coil Springs

They do a good job.

I would not put King Springs on my Skyline, but that's just me.

yeah but what sort of money am i looking at?

Too much :rofl:

I got my BCs brand new for $1200. I'm guessing they'd be around the same price for a Skyline.

Best value coilovers in my opinion and a lot of people praise the ride quality.

Too much :rofl:

I got my BCs brand new for $1200. I'm guessing they'd be around the same price for a Skyline.

Best value coilovers in my opinion and a lot of people praise the ride quality.

She was talking about just changing the Springs, not the whole setup.

yeah but what sort of money am i looking at?

Roughly between $221 - $500

Hey awesome to see your car up here! Finally got mine back, just need to take some photos now :rofl:

I'm planning to lower my car 30mm on tein s.tech springs. Because mine is older I'll probably have to replace the shocks as well but not sure about yours. They sound like they have a good review from people on here. Bendigo Tyre Centre have them but I haven't been in to talk to them about prices yet.

http://bendigotyres.com.au/index.php?pr=Springs

Thanks for the advice guys. I was talking to my boyfriend about getting it lowered on the weekend and I said I would probably expect to pay up to $1000 to get it lowered, so I'm glad to see it's much less then I was expecting.

Kye-thanks for the link, was very interesting. I'd be interested to see what they would charge for fit and supply.

I'll be waiting to see photos, I haven't been able to see it yet >_< I got mine detailed on the weekend cost $150 to have the exterior only done. I'll be putting pics up once I get a nice day and maybe a cool back drop (that's better then my driveway)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...