Jump to content
SAU Community

Recommended Posts

hey mate,

i have nankang ns2's on my r34 gtt, on the rear i have 265/35/r18's on 10" rims which i was told by the shop (tyrepower newcastle) should be at 40psi, on the front i have 235/40/r18's on 9" rims which apparently are supposed to be at 38psi.

i'm guessing the difference in pressure has something to do with the differing height, not sure, but the pressures have suited me okay.

the back is a handful in the rain though

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5389857
Share on other sites

^ a 235/40 and a 265/35 have the same height of sidewall.

ahh ok, what do the 35 and 40 refer to then?

You all realise your tyre pressure will rise a few PSI after driving when the tyres have heat up...

and even more for a track day or drags, or on a hot day or cold, or day and night. it'd hard to allow for all conditions tho.

back in my karting days we ran roughly 13 psi, but we'd adjust it till there was a 2 psi difference between hot and cold to find the ideal setup for the day

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5391526
Share on other sites

ahh ok, what do the 35 and 40 refer to then?

It is the height of the tyre sidewall as a percentage of the width. ie. aspect ratio.

265/40 would be a higher sidewall than 235/40. thats why the common size is 265/35. keeping the rolling diameter similar across the 18" range. u see?

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5391698
Share on other sites

It is the height of the tyre sidewall as a percentage of the width. ie. aspect ratio.

265/40 would be a higher sidewall than 235/40. thats why the common size is 265/35. keeping the rolling diameter similar across the 18" range. u see?

i do, thanks mate, i'm still on the steep side of the learning curve lol

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5391702
Share on other sites

You all realise your tyre pressure will rise a few PSI after driving when the tyres have heat up...

My new tyre pressure monitoring system can see anything from 33psi to 39psi depending on weather / tyre temperature.

During warmer weather it was closer to 36 - 39psi.

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5392188
Share on other sites

before this thread gets out of hand with people asking what pressure they have for their tyre size (including myself!)

how much does a couple of psi matter? ok, so if we imagine the pressure is meant to be 40psi, for ease of numbers, and it runs at 38 psi. that's a difference of 5%, which would make fk all difference compared to other parameters, like temp, speed, cornering and driving style

and more importantly, how much does it vary between companies? because i'd imagine each company builds to it's own spec, which might vary by a few psi anyways

as a side note, my r34 was bought and after some dramatic events i checked the tyre pressure, it was 26psi, it was after that my worries about the prior owner began...

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5396356
Share on other sites

There is no one answer to this question. Ideally you want to run a tyre pressure that balances the car and feels good when you drive it. Typically tyres heat up and expand when you drive, so if you stand on the throttle at every set of lights i'd expect the rear tyres to heat up a little bit, however its mostly the front tyres that heat up more than the rears because you have the load of the car thrown forward under braking and also the fronts are constantly working harder that the rears because the turn and slide (if only slightly). Also this is in theory what could happen, in reality it doesn't make a difference when you're stuck behind a bus.

Secondly, with a gtr, I personally think you should run all four tyres with the same pressure because otherwise it may trick the g sensor into thinking you've got wheelspin.

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5399113
Share on other sites

Yea. I'm running 38psi "cold" (just driving from home to servo). I'm guessing it'll be around 40psi when hot?

Yep, pretty much and when the tyres have cooled down, it will go back to 38 psi.

and even more for a track day or drags, or on a hot day or cold, or day and night. it'd hard to allow for all conditions tho.

back in my karting days we ran roughly 13 psi, but we'd adjust it till there was a 2 psi difference between hot and cold to find the ideal setup for the day

Yes, true.

I just pump an all round 34 psi and seem fine.

:)

My new tyre pressure monitoring system can see anything from 33psi to 39psi depending on weather / tyre temperature.

During warmer weather it was closer to 36 - 39psi.

:D WTF!

:)

You got any pics of that, where did you get that?

Link to comment
https://www.sau.com.au/forums/topic/332257-tyre-pressure/#findComment-5400058
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...