Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

I am spastic and couldnt find a date, you talking this wed 25th at WSID? I could be keen...

yup, that is the one.

Thanks for the offer Dale. Just bought one as I needed L anyway.

See you tomorrow.

Andy

damn too good to be true then..

so scott what mods ? lol

From a Dyno thread

I finally got around to putting my results up...

Intake mods: Custom powerduct, K+N filter, 80mm intake, stage 1 Sierra highflow bushed turbo, cut down Greddy intercooler, 600 x 220 x 76, with custom piping.

Cam's denso plugs, still not breaking down at 1.1mm.

Custom 3.5 inch dump into highflow cat then 3 inch to quiet legalis system.

Blitz SBC type r boost controller.

Oil cooler, trans cooler.

E85 in the tank, most noticeable change yet.

R33 gtr Tomei fuel pump with ryco filter inline.

Deka 610cc injectors.

Emanage ultimate with map sensor.

Built re5 box with valve body, extra clutches and the converter unlocked with a switch.

17" Ku36 semi's on drifteks.

BC coilovers.

Plenty more, not performance based, the list would go on forever. ;)

From a Dyno thread

yeah thats pretty keen.

Im suprised the loss from fly to wheel on the standard setup!

looks like quite a modded m35 - nice ride scott!

looks like there will be lots to be done to mine to even get it close to that level.

switch for the stally eh.. techy!

Edited by PetroDola
yeah thats pretty keen.

Im suprised the loss from fly to wheel on the standard setup!

looks like quite a modded m35 - nice ride scott!

looks like there will be lots to be done to mine to even get it close to that level.

switch for the stally eh.. techy!

Switch for the stall clutch because it was trying to lock up with 250kw running through it, cooking the fluid in the process.

Be aware that in manual mode the trans cooler doesn't operate.

lol harsh.

will be in if we do it in a week or 3, will be interesting to see what china turb0 and rb30 can do :blink:

Sorry mate couldn't help myself. :)

You have a similar power output don't you Duncan? It will be interesting to see what time you can get out of the VL tractor engine...

Switch for the stall clutch because it was trying to lock up with 250kw running through it, cooking the fluid in the process.

Be aware that in manual mode the trans cooler doesn't operate.

thats hecko's with the overheating.

good to know but - thanks for the tip regarding manual mode!

In my old torana it had a stage 3 semi auto with the 2500rpm stally and b&m shifter (old banjo 6cyl lsd)...but no auto clutching.. just slammed gears with compression lock ups rolling up to the lights...chewed way to much of the power though..halved the 300hp xu1 motor..but still bloody dangerous :thumbsup:

Edited by PetroDola

Hope everyone went well tonight. Was thinking bout tagging along, but he with the most Letters is the slowest!

Please tell me someone videoed it? post to Youtube please.

I'll get her out there next trip!

We had 3 M35 stagea's out on the strip tonight.

Unfortunately it was really busy as last week was rained out and lots came along this week limiting us to 2 runs each.

But down to the times.. I will let the other guys post their times.

My times were good but I was hoping for a smidgen better.

1st Run: 14.625 speed 155.1kmh (left in auto) 96.38mph

2nd RunL 14.659 speed 158.30kmh (in manual mode) 98.36mph

Not a bad result but was hoping to hit 14.3...

Bazillions of cars out at Eastern Creek tonight, only got two runs in sadly.

Wanted to get into the 14s; result!

First was 14.91 @ 93.66 mph (150.73 km/h)

Second 15.16 @ 93.35 mph (150.23 km/h)

Happy with the first, stalled up well, felt like it got off the line nicely, second was against a Pro tree, and I didn't get it stalled up properly, and it left the line like a stately English Manor...

The 14.91 I feel is pretty indicative of a basically stock car, I only have a K&N filter and the Group buy dump. That's it

Well done Andy & Rudi, great times guys, won't spoil it for you.

Edited by Daleo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...