Jump to content
SAU Community

Recommended Posts

The seller tells me he has had this car for 3 months and is not SAU'r

but i am guessing there pretty good chance the previous owner is a NSW SAU'r, hopefully someone knows the Car a bit

can anyone help me please

here is the Car Sales ad

Any comments Good or Bad (Bad - PM me) is appreciated

In NSW

1. REV check - Free from Web site, so that not an issue

2. any Workshops i can get Compression Test / Leak down test done for a good price

3. i got Nissan Fast installed on my Laptop, so will check, but it is run of the mill stanard GTR not V-spec / II or NUR , so not much check there

Cheers

Kushil

in 2 minds about importing at the moment, has this one and V-spec lined up in VIC, but like this one more as i like silver

Is it just me or that price is very low for an R34 GTR O_O

Other people can help you with this Kushil, good luck for the future. (I would've helped, but I myself have no experience with this type of stuff lol, so I might aswell learn from other members ;))

Edited by Joy 17

I smells a bit like too good to be true, Some of the mods sound a bit silly....EVC boost gauge??? errr?? apexi PFC for 2k??? try $1000...the huge brembo brakes are just standard etc.

Might be worth having a look at though...Id be paying very close attention to the engine/turbo health.

This is just one I am keen on, so will have look at it and see

With an open mind.

But yes compression test by a good performance

Workshop inspection will be done, if I do

End up getting serious with it

Looks exactly like one that used to be from my suburb. The owner moved about 7 months ago to somewhere near Bondi and was selling it at the time he moved.

It was serviced well from what he told me, had N1 turbos, makes about 300rwkw. Tuned by Indy at I.S.

If its the same one, its seen some track time. Dont believe the k's.

Looks exactly like one that used to be from my suburb. The owner moved about 7 months ago to somewhere near Bondi and was selling it at the time he moved.

It was serviced well from what he told me, had N1 turbos, makes about 300rwkw. Tuned by Indy at I.S.

If its the same one, its seen some track time. Dont believe the k's.

N1 Turbo's aye...

Thanks

Can you guys spell out some names of workshops "preferable club affiliated" where i can pay over the phone to get inspection done of the car

I don't know any workshops in Sydney and don't really want RTA inspection normally these places are hopeless with imports, let alone modified ones

Never believed KM on a car, but if the motor is good and N1 holding Up well as they should...

might not be as bad as i thought

Georges Hall isn't really that far from Unigroup Engineering at 17/17A Amax Ave Girraween.

I'd have it checked over by Yavuz at Unigroup. It's worth the odd $125 investment. Ph: 9631 2470 E: [email protected]

Don't forget the little things.. It most likely will need a decent service at some stage.. Coil Packs, Spark Plugs, Cambelt, Fanbelts, Clutch, Tyres ect.

Just be prepared to give it a full service if not now it'll need one down the track :thumbsup:

Edited by Pandoraa

Thanks for Help Guys.. really appreciate it

but it look like he does NOT like to get it inspected

so time to move on to another one, unless that changes from the Buyer

No way in Hell i am buy a GTR without proper check up

Thanks for Help Guys.. really appreciate it

but it look like he does NOT like to get it inspected

so time to move on to another one, unless that changes from the Buyer

No way in Hell i am buy a GTR without proper check up

Man if the guy is from Georges Hall and on his add says its not on revs and never been in an accident 100% something is up!!!! lol

I wouldnt waste my time, u know what they say you pay for what u get!!!

I cant see any genuine seller having a problem with a prospective buyer wanting to inspect the car unless they clearly have something to hide.

There are nice examples around for some good prices..just be patient & you will find what your after.

From the description, he's either really stupid, or knows his gtr and mods but just pretending to sound dumb. There's so much misinformation in there that even my 5 yo son knows those Volks are not 3 piece rims. However the RRP of 19" TE37's are more than that, so he's actually underquoted himself.

Now that I think about it, he is genuinely stupid.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...