Jump to content
SAU Community

Recommended Posts

hi guys,

just a question:

i was recently received a Excessive Noise Statement and did the required noise test.

so i went to Daalder Zorst in boxhill. not knowing much abt this noise test, he set up the mic etc etc and revved to 4800rpm. then said that my zorst was 10db over.

*ouch

anways, went back to the import dealer and one of the mechanics said that this particular guy at daalder was dodgey and makes a job out of these inspections.

the mechanic told me to goto a shop in st albans. i did that the following day and the tester said that 4800rpm was utter bull. this guy only tested my noise lever at 3200.

his explanation was that all cars that are imported and consequently have no engine numbers are tested at 3000 or there abouts.

any comments?

btw, i'm new to this forum

as you can see, this is in the wrong section...could an admin kindly place this in the correct section. excuse my retardedness

Link to comment
https://www.sau.com.au/forums/topic/33418-epa-noise-test/
Share on other sites

Yeah.. you always have got to be a bit cautious.. because the exhaust shop has something to sell you, but they're not always going to shark you. Plenty of jap. exhausts *are* way loud and don't meet Australian standards.

Anyhow noods, it don't really matter who you take it to and what they measure it at, as long as they're an approved EPA noise tester and can write off your notice then thats all that really matters..

Link to comment
https://www.sau.com.au/forums/topic/33418-epa-noise-test/#findComment-670784
Share on other sites

I took my car to Daalder in Box Hill.. and they were great..

they also did the test at 4800rpm

Im guessing they know what they are doing.. and the exhaust shop in st albans dont know what they are talking about..

I also have had nothing but good experiences with Daalder!!

;)

Link to comment
https://www.sau.com.au/forums/topic/33418-epa-noise-test/#findComment-671268
Share on other sites

hey guys, i need to go to test mine too, so which one better? st albans? box hill dallder?

i already got an aftermarket with resonator and muffler? what else "special resonator" they can add?? i'm hoping mine is around 89db though...

Link to comment
https://www.sau.com.au/forums/topic/33418-epa-noise-test/#findComment-674594
Share on other sites

I had an EPA on my bike at the start of last year. Ended up taking it to "a" St Albans tester (without naming names) and it was way over before we even got half way to the testing RPM. For a small fee (including the test) all i had to do was get some stock exhaust pipe numbers from a bike shop for him to say he saw it on the bike. The stock numbers went on the certificate and i rode off with a "quiet" bike. If i get done again, "i swapped my exhaust system back after the test".

I guess he only did it because he doesn't sell motorbike exhausts. Some guys can be pretty cool.

Link to comment
https://www.sau.com.au/forums/topic/33418-epa-noise-test/#findComment-675855
Share on other sites

Obviously higher than our 90db... maybe like 93 or 95

But there has been a new Jasma standard released sometime last year maybe, and best bet is to get the latest model exh from jpn that conforms to the new standard, as it will definitely be quieter than exhausts models made 3-4 yrs ago, and new models could under 90db (perhaps... ?)

Link to comment
https://www.sau.com.au/forums/topic/33418-epa-noise-test/#findComment-678888
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...