Jump to content
SAU Community

Recommended Posts

Got my car tuned a few days ago and have had a day or two to drive it around and feel the rush of power I was anticipating.

It does go really really good and makes 315kw at the wheels, having never owned a 300kw+ car before I was expecting it to make me feel like the drivers seat was going to snap off, but it's just not floating my boat as much as i thought it would.

So now I don't know whether to chase some bigger numbers or work with what I've got for now.

Spec

Engine is unknown but been told by previous owner its a forged rebuild

N1 turbo's

650cc injectors

2.5" stainless dumps into full 3" exhaust.

Is 350kw going to feel that much better or do ya need to go for the 400kw mark to really feel like the afterburners are firing????

Link to comment
https://www.sau.com.au/forums/topic/334210-where-is-the-wow/
Share on other sites

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

What was your previous power level? If you went from say 200awkw to 300+ (measured on the same dyno) you should certainly feel it.. but if you had high 200's already then obviously the difference is less pronounced.

Also, are you getting all those 315kw to the ground alright, how's you traction levels? Perhaps try borrowing a set of semis off someone and see how those feel?

And as the old saying goes, "more power is never enough" :blink:

Try this:

2nd or 3rd gear, cruise up to about 3-4k rpm, then slam your foot right down, floor it, with 315wkw and AWD, if you don't feel the massive pull, then you have problems my friend haha

my car's only got about 200kw at all fours, and if I do the above, it sends me hunting for the other lane, the sudden rush of torque is insane.

I think the problem is your power curve is very progressive, as mentioned the N1 turbos are designed for an almost linear power curve with no lag at all, so you don't feel an aggressive surge of power as most big single GTRs would...

He is in a GTR, there shouldnt be traction problems with 300rwkw!

N1 turbos, if R33/R32 items - laggy POS's for the power they deliver unfortunately, so if thats the case then thats sorted out as to why:)

Put a set of Garrett -9s on there and for the same power, it'll all be all on maybe 1000rpm earlier, even more perhaps.

Also remember GTR's are quite heavy. 280rwkw in my 1450kg car feels similar to a GTR with 330rwkw and what, 1650kg?

When i was coming out of a corner, full throttle from 4000rpm with a sorted 330rwkw in a GTR - certainly some G forces goin on!

The difference is never as big as you'd expect, when i went from 285rwhp to around 440rwhp in my r33 gts-t i thought it would knock my socks off.. was rather disappointed, especially after all the hype you hear about 300rwkw cars. I suppose things never quite live up to the hype. I'm hoping the 500rwhp mark will be a little more exciting.

Jarrod

its the torque that you feel

I would also add that its the 'change in torque' that gives you that holy crap feeling. So a turbo with more lag will have a greater change in torque and give you more of a rush.

Some people like the responsive linear fast track car sort of power and some people like the nothing nothing oh holy crraaaappp feeling. I think its personal and what you use the car for.

I remember someone on this forum posting about going for a ride in the corvette ZR1, he said it felt quick but not mind blowing until he looked down at the speed. A car with constant torque will be very fast and be better at achieving traction but tends to not give that 'rush' feeling.

Bit more than that mate.

Bigger wheels, larger exhausts & so on, passengers, fluids etc.

R33's certainly tip a lot more than 1500kg

From the always perfect wikipedia (all are curb weights):

R32 GTR: 1430kg

R32 GTR V Spec: 1480kg

R33 GTR: 1540kg

R33 GTR V Spec: 1550kg

R34 GTR: 1540kg

R34 GTR V Spec: 1560kg

Interesting topic.

Mine at 262rwkw was a real blast to drive and was like a sling shot when it came on, you really felt that feeling in your pants that the car was flying. Then you get used to it and it doesn't feel fast anymore. Maybe you've built up this image in your head of what to expect which was more than it could give and now the reality is setting in?

its the torque that you feel

I wish people would stop saying things like this, torque and power are directly related, at a given rpm with a given power level, you will always have the same amount of torque and vice versa.

You feel the acceleration, this is caused by power OR torque, they are both the same thing when you are talking about acceleration.

I would also add that its the 'change in torque' that gives you that holy crap feeling. So a turbo with more lag will have a greater change in torque and give you more of a rush.

This is pretty much correct except change in torque is identical to change in power, basically where there is the biggest slope in the dyno graph is where you will feel the biggest punch in your back.

^^^^

yes and no...

Torque is the derivative of power with respect to RPM. I.e. Torque x RPM = power (sorta...), like talking about position is torque, then speed is power. Same sorta relationship. So it's pretty erroneous to talk about power when talking about acceleration, because power is a rate of energy usage, not a force.

He is in a GTR, there shouldnt be traction problems with 300rwkw!

N1 turbos, if R33/R32 items - laggy POS's for the power they deliver unfortunately, so if thats the case then thats sorted out as to why:)

Put a set of Garrett -9s on there and for the same power, it'll all be all on maybe 1000rpm earlier, even more perhaps.

Also remember GTR's are quite heavy. 280rwkw in my 1450kg car feels similar to a GTR with 330rwkw and what, 1650kg?

When i was coming out of a corner, full throttle from 4000rpm with a sorted 330rwkw in a GTR - certainly some G forces goin on!

Traction is definantly not a problem and if the older generation N1's are naturally laggy that would explain a few things.

The power is like flicking a switch in 1st gear....Waiting waiting waiting... then BOOM its all on!

I guess I was expecting that in 2nd and 3rd aswell, that rush of Big Bore bike acceleration that I used to have in my Hayabusa days.

Makes 280rwkw@13psi and 315rwkw@19psi.

I guess these turbo's are at their limits so if they are older style N1's I might be in the market for an upgrade.

Would the -7's be that much better to warrant the expense?

From the always perfect wikipedia (all are curb weights):

R32 GTR: 1430kg

R32 GTR V Spec: 1480kg

R33 GTR: 1540kg

R33 GTR V Spec: 1550kg

R34 GTR: 1540kg

R34 GTR V Spec: 1560kg

Ye, so easily 1600+ with driver, wheels & heavier exhausts etc.

Traction is definantly not a problem and if the older generation N1's are naturally laggy that would explain a few things.

The power is like flicking a switch in 1st gear....Waiting waiting waiting... then BOOM its all on!

I guess I was expecting that in 2nd and 3rd aswell, that rush of Big Bore bike acceleration that I used to have in my Hayabusa days.

Makes 280rwkw@13psi and 315rwkw@19psi.

I guess these turbo's are at their limits so if they are older style N1's I might be in the market for an upgrade.

Would the -7's be that much better to warrant the expense?

Sounds exactly like how R33/R32 N1's deliver. For their time they were ok, but turbo tech has come a long way and improvements are signifigant.

Better wheel combination, ball gearing etc etc.

If you dont have cam gears fitted/setup, then you could potentially make it a "bit" better but it wont be fixing your issue overall i dont feel... but a good gain none the less in response.

So i guess the "wow" isnt there because its not going to be. Try and find a user on here with a 300-330rwkw -9 / GT-SS setup and go for a run in that and see if that is more what you want and go from there i reckon.

You want -9's, not 7's. 7's are a useless item these days really as the -9 superseed them in everyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...