Jump to content
SAU Community

Recommended Posts

Hi,

Just wondering if S1 and S2 autos are the same ?

Also the front diff does that just use engine oil ?

The transfer case, thats part of the gearbox so it uses transmission fluid right ?

How do you flush this transmission ?

Thanks in advance

Brendan

Link to comment
https://www.sau.com.au/forums/topic/334481-s1-and-s2-4wd-autos/
Share on other sites

S1 auto is pretty much an R33 and earlier box.

S2 auto is an R34 tiptronic box, fair bit different to the S1.

Not sure on front diff.

Transfer case is seperate to the gearbox and uses its' own fluid, have a search and you'll find out what it is.

Just wondering if S1 and S2 autos are the same ? No

Also the front diff does that just use engine oil ? NO, GL5 85w-90 gear oil...where did you get that idea from ???

The transfer case, thats part of the gearbox so it uses transmission fluid right ? yes

How do you flush this transmission ? take it to an transmission shop for best results

Hi,

Just wondering if S1 and S2 autos are the same ?

Also the front diff does that just use engine oil ?

The transfer case, thats part of the gearbox so it uses transmission fluid right ?

How do you flush this transmission ?

Get yourself an auto sump gasket kit and a 20L drum of (ideally) quality synthetic atf. You need 12 to 14L for the auto and you can use the rest for your attessa and power steering. Drain the sump and drop it (easier said then done - you will have to support the box and remove the rear mounting). You will only get betweeen 1 and 2 litres this way. Check that the new internal filter is exactly the same (otherwise the sump won't go back on) and if not either modify the new one to suit or clean the old one and put it back. Put 2L of fresh oil down the dip stick tube.

Then pull a hose off the trans oil cooler and run the engine until you have pumped out 2L into a container. Pour 2L of new oil down the dipstick tube and repeat until you get clean oil coming out. This will take 12 to 14L in total.

I'm totally confused with the s1 and s2 business.

Does that only apply to m35s or does it apply to c34's also ?

And what is this in reference too this thread?

and if its only for m35's and mine being a s1, why is it a 5 speed triptronic?

or is it 4 with overdrive?

Edited by PetroDola
I'm totally confused with the s1 and s2 business.

Does that only apply to m35s or does it apply to c34's also ?

And what is this in reference too this thread?

and if its only for m35's and mine being a s1, why is it a 5 speed triptronic?

or is it 4 with overdrive?

This thread refers to S1 and S2 C34 1996 to 2000 not M35.
  • 2 months later...
Does anyone know what needs to be done to fit a s2 tip auto into an s1? So, other than box & steering wheel, what else (ecu?...)?

if your going to go to this level of f**king about just put in a 5 speed ;-) The tiptronic's not that cool.

Yeah ive thought about the gtr box, as ive driven manuals all my life! But recently ive discovered how easy autos are to drive in peak hour traffic, but they totally suck balls in the hills! So i was hoping for the compromise of auto with the ability to have some control over the shifting when i needed to! (ive never driven a tip gearbox though)

So i guess that raises the question of will a neo ecu run an s1 rb25? (nistune?)

Yeah ive thought about the gtr box, as ive driven manuals all my life! But recently ive discovered how easy autos are to drive in peak hour traffic, but they totally suck balls in the hills! So i was hoping for the compromise of auto with the ability to have some control over the shifting when i needed to! (ive never driven a tip gearbox though)

So i guess that raises the question of will a neo ecu run an s1 rb25? (nistune?)

I believe the short answer to the above is no although my mechanic is fond of saying anything is possible if you want to spend enough money. In fact I don't think the tiptronic has any more abilities in the hills than the S1 box (which I used to have before I converted it to manual). With the S1 box you can turn off the "overdrive" which leaves you the bottom three gears or if you are going downhill with a caravan or car on a trailer you can chop down to 2nd. If you also hit the snow button that cuts out 1st gear so you can pretty much control what gear you are going to use. I can't really see any value in changing to tiptronic.

^^ lol

The tiptronic box is far superior than the earlier auto.

Put a shift kit in it and it's excellent.

As for getting a Neo ECU to run a normal 25.. you would need to find out everything that is different sensor and wiring wise, and change it to suit the Neo.

OR

Just get a s2 halfcut and ditch your crappy normal 25 in favour of the Neo :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...