Jump to content
SAU Community

Recommended Posts

will E85 run my lawnmower?

What brand should i go for!

Funnily enough I recently bought a Victa.....I had to chuckle...the fuel filler cap had a "X" embossed over "E85". So thats a no to E85 love for your Victa.

  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Manildra is higher Octane, The Manildra product is NEVER THE SAME OCTANE OR RON.

Also other sellers mix small poor quality batches of so called Race E85.

ONLY SUCROGEN/CSR PREMIUM E85 HAS A 108 OCTANE - How do I now this ? I blend and make the fuel.

FACT - NO OTHER E85 COMES CLOSE TO THE PERFORMANCE OR PROTECTION OF SUCROGEN E85.

SUCROGEN E85 108 Octane is the only tested and race proven E85 in the Australian market place.

Manildra is higher Octane, The Manildra product is NEVER THE SAME OCTANE OR RON.

Also other sellers mix small poor quality batches of so called Race E85.

ONLY SUCROGEN/CSR PREMIUM E85 HAS A 108 OCTANE - How do I now this ? I blend and make the fuel.

FACT - NO OTHER E85 COMES CLOSE TO THE PERFORMANCE OR PROTECTION OF SUCROGEN E85.

SUCROGEN E85 108 Octane is the only tested and race proven E85 in the Australian market place.

was fun to watch on the track down the main strait she torq steers a little under boost.

They only drove it here and there and to be honest with some of the wankers on the track id pick my time and place to drive it aswell.

Alot of the rear wheel drive v8 boys just had cutters on to do power skids and shit due to the fact they all took off the slicks when it did not help when they got spanked by rice cookers ;)

I saw one guy rage big time when i beat him 2 runs in a row under his own conditions,First time 40 at the bollards destroyed his charged commo second time he screamed at me 20 at the bollards im like ill be off boost he said "exactly" so i figure it id do it to shut him up and still beat him easy lol,Next corner he just started to do burn outs and yelling abuse out of his redneckadoor lol.

Fk em i say,

IF they only started with a good pakage to begin with!

Seen this car today in coffs looks mean, that turbo is huge. Was very disapointed along with the rest of the crowd though as they did not even get the baby on track like they kept saying they would. Can only imagine the sound of that turbo.

Cam

More insults from behind your keyboard, would you happen to sell fuel as well ? I know more about fuel production than you ever will no matter how much you Google the subject.

don't get all sooky just because you've shot yourself in the foot and been proven completely wrong - you came on hear telling me i'm talking crap, i refute it and show you to be wrong and now you're having a cry - man up dorothy. It's not google numb nut, it's the fuel i buy from my local E85 station

anyways, it's a pity such a monster of a car has some ignorant businesses jumping on for an exposure ride..

anyways, nitto/paul/trent, what fuel system are you running on this thing??? id2000's and 11ty 044's?

Seen this car today in coffs looks mean, that turbo is huge. Was very disapointed along with the rest of the crowd though as they did not even get the baby on track like they kept saying they would. Can only imagine the sound of that turbo.

Cam

so did it or didn't it get on the track?

Seen this car today in coffs looks mean, that turbo is huge. Was very disapointed along with the rest of the crowd though as they did not even get the baby on track like they kept saying they would. Can only imagine the sound of that turbo.

Cam

The motor is brand new (was only tuned just over a week ago) so is not revving to its extent yet and I'm not even going to say how much it's worth lol! The track at Raleigh is also too small and without nitrous we weren't going to risk the motor by revving the bejesus out of it just to do a powerskid. Plus, it was in AWD still and we weren't going to go through the hassle of removing a shaft for RWD... We told Raleigh Raceway that we were bring NITTO to put on display but were not getting it out on the track.

It'll be down at the final round so hopefully things will be different then so you'll just have to rock up and see!

Quite a few people do have vids of it on the track at Powercruise (both in-car and out) so we're waiting for them to be posted up!

Nick81XD - that'd be great if you could put yours up

I know what a car like that can cost and understand the reasons it never hit the track, look what happened to old buds VK, one skid and he got towed, nasty. Hope to see it at the final.

Cam

I know what a car like that can cost and understand the reasons it never hit the track, look what happened to old buds VK, one skid and he got towed, nasty. Hope to see it at the final.

Cam

He only melted a couple of ignition leads so it looked worse than what it was actually!

Yep, NITTO will definitely be there, hopefully this time out on track :P

Bring on the Bandag Bullet at the final too for some epic skids...

I basically thrashed the car all weekend and the last thing on sunday put it on the dyno just to see how it would go.

Should be lots of video out there if the above is true,

The only time i saw it move was to go from the cock flop car park to the dyno. :P

Should be lots of video out there if the above is true,

The only time i saw it move was to go from the cock flop car park to the dyno. :D

Wow! You must have been in the wrong places at the right time then if you didn't see it on track - it went out about 6 times :P

Trent was sharing the 34 with the 35 all weekend, so when the 35 was out the 34 wasn't and vice-versa...

Wow! You must have been in the wrong places at the right time then if you didn't see it on track - it went out about 6 times :D

Trent was sharing the 34 with the 35 all weekend, so when the 35 was out the 34 wasn't and vice-versa...

Well damn! I was hoping to catch the 35 on track and missed that too.

Must have been too many fine looking ladys to divert my attention. :P

Well damn! I was hoping to catch the 35 on track and missed that too.

Must have been too many fine looking ladys to divert my attention. :P

Double WOW!!

Kristian from Iron Chef went in NITTO, he's got in-car footage of the track, and then the dash/hoodlining as she comes onto boost lol!

Yeah, the Monster girls were just too damn hot eh?? :D

Double WOW!!

Kristian from Iron Chef went in NITTO, he's got in-car footage of the track, and then the dash/hoodlining as she comes onto boost lol!

Yeah, the Monster girls were just too damn hot eh?? :P

Damn gorgeous actually. And not just them, Never saw so many hotty;s even just in the crowd.

Paint tigz on the cars so i wont be distracted by outside influences next time. :D

Our shed got like 45 gig of footage for the week end,YEt to even get my hands on it yet,All at my tuners house but if i find some of the 34 ill be sure to post it up,

Accept the footage of me asking the mercury guy to stay away from me with his nitto ill keep that to my self!!

The mercury guys were very friendly i had some awsome runs with phat33 we were ever so evenly matched for the most part.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...