Jump to content
SAU Community

Recommended Posts

HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

Only works well with a grounding kit. $80 - $150 about

HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

Same transmission. Same delay.

As Paul said, a grounding kit makes a difference but only if it is connected to the trans dipstick bracket.

Also, shift kits are readily available and can be shifted interstate if that is what you want.

Have a look at Wholesale Automatic Transmissions here in Vic. If you send them your valve body, they will kit it and send it back to you for installation. They have told me that it has been used on a rock climber with 473kw without any kind of failure from the transmission... just remember to install a trans cooler as well!

Same transmission. Same delay.

As Paul said, a grounding kit makes a difference but only if it is connected to the trans dipstick bracket.

Also, shift kits are readily available and can be shifted interstate if that is what you want.

Have a look at Wholesale Automatic Transmissions here in Vic. If you send them your valve body, they will kit it and send it back to you for installation. They have told me that it has been used on a rock climber with 473kw without any kind of failure from the transmission... just remember to install a trans cooler as well!

that sux, has any one here done the shift kit on a v35, i've heard about them but do they just reduce slippage? does it help at all with the delay?

that sux, has any one here done the shift kit on a v35, i've heard about them but do they just reduce slippage? does it help at all with the delay?

I think im the only one to build the re5 over here, Kewish automatics did mine. Its handling 300awkw at the moment but I had to ditch the torque converter lockup.

Shifts instantly now but the stock ecu still drops timing between changes which is a good thing at that power...

I think im the only one to build the re5 over here, Kewish automatics did mine. Its handling 300awkw at the moment but I had to ditch the torque converter lockup.

Shifts instantly now but the stock ecu still drops timing between changes which is a good thing at that power...

Just go manual ! If ur buying a V35 then why auto?

Just go manual ! If ur buying a V35 then why auto?

i gotta share it with the wife, for when i take her commodore to tow the race car, and she doesn't drive manual, im trying to find a way around it so i can get the manual!! the only way i see it right now is to put a tow bar on the v35 and use that, that way i can get the manual, cause i don't need the wife's car to tow. but i gotta check the tow rating first before i go making plans.

i gotta share it with the wife, for when i take her commodore to tow the race car, and she doesn't drive manual, im trying to find a way around it so i can get the manual!! the only way i see it right now is to put a tow bar on the v35 and use that, that way i can get the manual, cause i don't need the wife's car to tow. but i gotta check the tow rating first before i go making plans.

Just buy her a bus pass when u take her car, problem solved.

I don't drive manual so I don't know about them.

But I think auto is not that bad either, if not the worse. It goes smooth and can enjoy the car more when cruising around.

Also, if you feel like having abit of fun, all you have to do is step on the pedal. :P

Great auto gear box I reckon, It is no Ferrari F1 or BMW SMG2, just put it in D and press the power to button and you will find it a great daily.

Not a good match on the track, but it is fine on winding roads or city streets.=D

I find the V35 autos are pretty smooth and responsive, more so in tiptronic mode.

Had an automatic Supra and compared to the V, its quite slow by way of when to downshift and overall responsiveness.

However the tiptronic sometimes won't shiftwhenever you want since the ECU probably protects the engine from over revving.

  • 1 year later...

just wondering about this V35 transmission and i got some question regarding to it, i'm currently considering to purchase a v35 "04" with A/T transmission with it, clocked over 140000 km, how reliable are these AT transmission?

Edited by ballsmyberries

the weakest nut on any gearbox is the nut behind the steering wheel. the key is to treat it nice, service it regularly, and dont be a tool.

i personally find the auto shifts much better at 3/4 acceleration than when your foot is to the floor. the ecu tends to override manual mode when youre pushing it

and you only really hear about the CVT8 gearboxes being problematic

Edited by Deep Dish V35

In "D" mode the V35 is the best auto gearbox ive come across. Really smooth and 99% of the time chooses the right gear with little delay. In my opinion its better then the 5 speed in the V36 (in auto mode). But in sport mode the V36 one is better.

The RE4/RE5 gearbox has been around for years (my mates 1988 nissan cefiro has a RE4 box similar to mine only with software change) and is a great box, yeah its not a VW DSG unit but do remember your not driving exactly a small car you are driving a big lazy sedan/coupe/wagon

the weakest nut on any gearbox is the nut behind the steering wheel. the key is to treat it nice, service it regularly, and dont be a tool.

i personally find the auto shifts much better at 3/4 acceleration than when your foot is to the floor. the ecu tends to override manual mode when youre pushing it

and you only really hear about the CVT8 gearboxes being problematic

The problematic part of the CVT is probably the nut behind the steering wheel as well.

The RE4/RE5 gearbox has been around for years (my mates 1988 nissan cefiro has a RE4 box similar to mine only with software change) and is a great box, yeah its not a VW DSG unit but do remember your not driving exactly a small car you are driving a big lazy sedan/coupe/wagon

RE4/RE5 doesn't really define the gearbox type, it really just states that it is an electronic controlled 4 or 5 speed auto box. there were many transmissions that started with RE4, some were good, some weren't, all having signifincant differences. eg. the RE4F02A has the valve body on the top and wasn't known for reliability. the RE4F04A has the valve body on the bottom and was much stronger. the RE4/5 in the V35 is quite different again.. considering it is a RE5R.. (RWD box).

That said, the unit fitted to the V35 seems to be quite good..

thanks and appreciated it alots for the information. how to ensure that the gearbox is in tip top condition when i go the the test drive? I've been driving a stick for all my life and I wish to replaced my wife's car with V35.

Edited by ballsmyberries

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...