Jump to content
SAU Community

Need Someone To Make Up An Intake Pipe(melb)


Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

R34 is getting re-tuned tonight! I will post before and after results...........

Can't wait to see the results...

Just did a similar intake for HEKT1K, should help with his 3071's power, the rubber intake was sucking closed at 250kw also.

I'm keeping Trent busy, should get commissions. lol.

Can't wait to see the results...

Just did a similar intake for HEKT1K, should help with his 3071's power, the rubber intake was sucking closed at 250kw also.

I'm keeping Trent busy, should get commissions. lol.

OK, so it turns out the new intake made a significant difference.

Old tune- 260.3Rwkw

414.9Nm

New tune- 291.7Rwkw

492.1Nm

Thanks to Scotty nm35 for the intake work.

Thanks to Trent from Status tuning for yet another awesome tune!

OK, so it turns out the new intake made a significant difference.

Old tune- 260.3Rwkw

414.9Nm

New tune- 291.7Rwkw

492.1Nm

Thanks to Scotty nm35 for the intake work.

Thanks to Trent from Status tuning for yet another awesome tune!

wait are you saying you gained 31rwkw's by using this pipe?? or were there other changes?

Just the pipe, a different pod and tune.

Good result, as I said there was another easy 30kw in the intake but i'm impressed by the nearly 80nm torque gain too. How does it feel now?

Now get some ethanol in the sucker James. :down:

wait are you saying you gained 31rwkw's by using this pipe?? or were there other changes?

Yes battery, the standard intake(with metal forced in to stop it sucking shut) was just to restrictive.

Just the pipe, a different pod and tune.

Good result, as I said there was another easy 30kw in the intake but i'm impressed by the nearly 80nm torque gain too. How does it feel now?

Now get some ethanol in the sucker James. :down:

It feels very strong Scotty....

Its funny you mention the E85, Trent and I were talking about it and will be my next power mods(bigger injectors and pump).

But I will be up for new semis soon and badly need a 2way, so more power will have to wait :P

I am looking forward to seeing how it goes at Winton on Tuesday....

I thought i would post up more of Scott's handiwork. Here's the intake pipe he did for me the other day

No issues with reversion or anything like that, and should look nice and stealth once i hit it with some matte black paint

EDIT: photos aren't the best, i might put up some more photos when i pull it off to paint it this weekend

post-51448-1288171087_thumb.jpg

post-51448-1288171100_thumb.jpg

I thought i would post up more of Scott's handiwork. Here's the intake pipe he did for me the other day

No issues with reversion or anything like that, and should look nice and stealth once i hit it with some matte black paint

EDIT: photos aren't the best, i might put up some more photos when i pull it off to paint it this weekend

looks tops mate i cant wait to get one too :ermm:

more pics!!! :ermm:

bah... if i'd known you did this scotty i'd so have employed your services!! i too found the limits of the rev210 intake mod and got Chasers to fab me up a full metal intake pipe, standard BOV and airbox, couple 45 degree bends... so it was pretty straight... fairly pricey though as apparently it was quite fiddly to get right.

bah... if i'd known you did this scotty i'd so have employed your services!! i too found the limits of the rev210 intake mod and got Chasers to fab me up a full metal intake pipe, standard BOV and airbox, couple 45 degree bends... so it was pretty straight... fairly pricey though as apparently it was quite fiddly to get right.

Don't you regulars read this Fabrication forum, Trent mentioned yesterday he didnt know I fabricated. (I dont want to tell too many people. lol)

It is quite hard to get right, the bov piping is a pain and takes longer to fabricate than the suction pipe.

damn... wonder what my car would have made... we ran it on the dyno to check AFR's after putting it in (chasers, not status) and everything was fine, actually said there was still quite a bit in just going of the AFR's. Oh well, something for the new owner to have a nice surprise about.

damn... wonder what my car would have made... we ran it on the dyno to check AFR's after putting it in (chasers, not status) and everything was fine, actually said there was still quite a bit in just going of the AFR's. Oh well, something for the new owner to have a nice surprise about.

Generally where there is more airflow, you would need more fuel so the top end should lean out with 30kw more. Good that you checked afr's before selling, most people would have flogged it without bothering with the intake at all I guess.

Did you swap to dino fuel map or leaving it on E85? What are you upgrading to?

  • 2 months later...

Wow scotty by the looks of things, your work is amazing, the pipes come out looking really nice and a 80nm increase from the intake pipe thats crazy dude. Good to hear people are doing awesome fabrications here. im starting to like this section of the forums :)

Thanks but the gain comes from removing the intake restriction, not adding my pipes. :)

I think the lobster bends come out looking great if you can keep them narrow with even angles and width.

The response can be improved by the tuner afterward, allowing him to increase the timing and lean out the fuel coming onto boost, with less restriction in the intake.

Thanks but the gain comes from removing the intake restriction, not adding my pipes. :)

I think the lobster bends come out looking great if you can keep them narrow with even angles and width.

The response can be improved by the tuner afterward, allowing him to increase the timing and lean out the fuel coming onto boost, with less restriction in the intake.

show off!

APPARENTLY - my suction pipe to the Turbo restricts the total output at 200kw if I was to go ahead and tune the bugger, so before this day comes, me and scott are doing mine too which is apparently a bitch of a job hopefully i can pull much more out of my turbo'd fridge on e85

Scott does good work. reccomend him fabrication for such things like these. instead of getting a dodgy to do em.

i dont understand, why have a larger intake pipe when the intake on the turbo is smaller?.... your restriction will always be the turbo intake pipe on the compressor housing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...