Jump to content
SAU Community

Recommended Posts

So who is keen?

saturday 13th and sunday 14th

need to be a member of a cams affiliated club (hello SAU NSW!) and need to hold a minimum of L2S Cams licence

http://www.skylinesaustralia.com/forums/Na...ts-t333260.html

theres a bit of info there in that link.

If you are interested we can have a road trip!

  • 2 weeks later...

Yep,

friday and monday off!

from my joint in gosford it said around 8 or so hours via new england hwy but with me towing a bit longer.

mitch, leaving fri coming back mon

Yep,

friday and monday off!

from my joint in gosford it said around 8 or so hours via new england hwy but with me towing a bit longer.

mitch, leaving fri coming back mon

will try and get time off work shouldn't be a problem. if not may be feeling a bit sick :laugh:

because i'm pulling the engine out today and replacing bearings and piston rings. also saving for coilovers after the wakie track day i had way to much body roll so no more track days till i get coilovers

  • 2 weeks later...

sorry Chris, haven't got back to you. I am going to book accomodation and entry after next weekend's round race meet.

I'm going to leave and do a few hours thursday night to keen friday's drive nice and short....lots of fuel stops when towing with a stagea :banana:

then back on Monday.

sorry Chris, haven't got back to you. I am going to book accomodation and entry after next weekend's round race meet.

I'm going to leave and do a few hours thursday night to keen friday's drive nice and short....lots of fuel stops when towing with a stagea :P

then back on Monday.

Hey Duncan,

I still may or may not need a lift up... I might be looking at driving up myself and spending the few days after over on the gold coast.

Will let you know in the next day or two!



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...