Jump to content
SAU Community

Recommended Posts

So who is keen?

saturday 13th and sunday 14th

need to be a member of a cams affiliated club (hello SAU NSW!) and need to hold a minimum of L2S Cams licence

http://www.skylinesaustralia.com/forums/Na...ts-t333260.html

theres a bit of info there in that link.

If you are interested we can have a road trip!

  • 2 weeks later...

Yep,

friday and monday off!

from my joint in gosford it said around 8 or so hours via new england hwy but with me towing a bit longer.

mitch, leaving fri coming back mon

Yep,

friday and monday off!

from my joint in gosford it said around 8 or so hours via new england hwy but with me towing a bit longer.

mitch, leaving fri coming back mon

will try and get time off work shouldn't be a problem. if not may be feeling a bit sick :laugh:

because i'm pulling the engine out today and replacing bearings and piston rings. also saving for coilovers after the wakie track day i had way to much body roll so no more track days till i get coilovers

  • 2 weeks later...

sorry Chris, haven't got back to you. I am going to book accomodation and entry after next weekend's round race meet.

I'm going to leave and do a few hours thursday night to keen friday's drive nice and short....lots of fuel stops when towing with a stagea :banana:

then back on Monday.

sorry Chris, haven't got back to you. I am going to book accomodation and entry after next weekend's round race meet.

I'm going to leave and do a few hours thursday night to keen friday's drive nice and short....lots of fuel stops when towing with a stagea :P

then back on Monday.

Hey Duncan,

I still may or may not need a lift up... I might be looking at driving up myself and spending the few days after over on the gold coast.

Will let you know in the next day or two!



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...