Jump to content
SAU Community

Recommended Posts

hi all,

i have fitted a 2nd hand alternator and no charge.

could it be another dud alternator?

what else could make an alternator not charge? i have checked the alt fuse and its good...checked all the other fuses and all good....

really want to get it back on the road this weekend....any help would be appreciated.

thanks!!

hi all,

i have fitted a 2nd hand alternator and no charge.

could it be another dud alternator?

what else could make an alternator not charge? i have checked the alt fuse and its good...checked all the other fuses and all good....

really want to get it back on the road this weekend....any help would be appreciated.

thanks!!

Did u check for any voatage drop between alt + and bat +. it must be less than 0. same time check the Continuity test...?

battery and + from alternator is the same voltage....

what is a continuity test?

its a new battery with 12.8v when charged....so battery is fine...

changed the alternator again and no charge....so either got another dud alternator or something else is stuffed....is there a way i can test the alternator itself? ie not connected to the car?

i have connected the thin black with that has the 10mil bolt....i have connected the earth clip...i have connected the positive to the alternator...am i missing anything?

hey mate i just had a look at the alternator on my r32 and it has 1 large black wire (earth) one large white wire which runs to the battery, it also has 2 thin wires but i cant really see where they go although i think one of the thin wires should go to the battery or a 12v feed and somtimes these wires burn out due to the constant voltage running through them, also there would have to be a wire going to the dash for the charge light? does the charge light stay on when the car is running?

i have probaly been no help whatsoever but you never know

corin

maybe that wire to the dash has burnt out...there was only the one thin wire to the alternator when i was taking it off...

does anyone know how to test if this wire is the fault?

maybe that wire to the dash has burnt out...there was only the one thin wire to the alternator when i was taking it off...

does anyone know how to test if this wire is the fault?

hey the wire going to the dash wouldnt burn out, but maybe that wire doesnt come straight off the alternator on an r33, there needs to be 2 wires going to the battery or a 12v source (a feed and a return) im a 99% sure of this.

what i would try would be to join onto the thin wire at the alternator and run it to the + on the battery and see if that fixes it, you can always join the wire back up if it doesnt work, but i think it would definatly be worth a try.

corin

Sorry to jim in but the other day at the track my voltage dropped from 13.6 to 11.8 and there was this whizzing sound coming from under my dash

I unplugged the box next to fuse panel that was making the noise and my rev needed went dead, the noise stopped but the volts didn’t change.. so i just plugged it back in

Then on the way home the volts slowly dropped to 11.1

So im replacing my alternator, hopefully that will fix this problem?

Edited by gfunkk

i dont have the same model alternator as you but see if the thin wire to back of alternator has ignition 12v to it. if not there could be a prob with the excitation circuit depending on how that model works. you already he done alternator and doesnt sound like battery problem. if there is no power at back of alternator on the thin wire connect multimeter to battery of alternator circuit and quickly touch alternator + to thin wire terminal and see if it springs to life.

Sorry to jim in but the other day at the track my voltage dropped from 13.6 to 11.8 and there was this whizzing sound coming from under my dash

I unplugged the box next to fuse panel that was making the noise and my rev needed went dead, the noise stopped but the volts didn’t change.. so i just plugged it back in

Then on the way home the volts slowly dropped to 11.1

So im replacing my alternator, hopefully that will fix this problem?

just an update if anyone cares, my voltage regulator was f'd

costed me $220 for a full rebuild

  • 5 weeks later...
Problem resolved. The wire from the alternator to the dash failed. Can't believe that's all it was. Cars working like a dream. Thanks everyone!

So they are the same design as VL, I couldnt believe the alternator stops working if the dash light circuit fails but thats the way it seems to be wired.

Does that mean if the dash bulb blows you're not charging?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...