Jump to content
SAU Community

Recommended Posts

I'm not sure on the exact details as in 2000 onwards the models start to change so much.

http://www.carpoint.com.au/all-cars/privat...=1&__N=1216 1246 1247 1252 1282 903 53 1708&silo=1011

See that one is a V Spec I 2000 model and has the grey seats.

It would have been a certain month in 2000 when they did the change over.

True, though I'm not sure it's a VSpec1? It does have the front diffuser but I've read that the dash (speedo) is that of a Non-VSpec GTR?

e.g the revs 0-3,000rpm are still even spaced. I've read that the VSpec rpm from 0-3,000 is closer together.

So much confusion over GTRs :D

I am sure you all want to know what the differences are... :D as I have posted.

The V-Spec II N1 / V-Spec II Nur / M-Spec Nur will have the best value for money.

Base models / V-Spec / V-Spec II / M-Spec's are not worth the extra as there is nothing to separate it from being anything special

My understanding is that in 2000 (approx Aug-Oct) Nissan released an update for the R34 GTR:

-V-Spec became V-Spec 2 and got carbon bonnet, updated interior, aluminum pedals, larger rear rotors, clear front and side indicators etc

-Non V-Spec was still non V-Spec yet got the updated black cloth interior, aluminum pedals, slightly larger rear rotors, clear front and side indicators etc but no carbon bonnet, no front or rear diffusers, slightly softer suspension (I think?) and an MFD that didn't include intake and exhaust temps.

Therefore it is possible to get a 2000 model GTR V-Spec (from Jan to Aug-Oct) or GTR V-Spec 2 (Aug-Oct onward)

Also I believe that the front V-Spec diffuser was a factory option for non V-Spec GTR's.

EVOIV is also right regarding the spacing 0-3,000rpm on the tacho. This makes me think that the GTR in question is not a genuine v-spec or has had a dash swap (I cant see if it has the rear diffuser, intake and exhaust temps on the MFD). Ultimately the best way to check a GTR is buy using Nissan FAST and running the VIN. There are too many people out there fiddling GTR's and claiming things they shouldn't.

Ultimately the best way to check a GTR is buy using Nissan FAST and running the VIN. There are too many people out there fiddling GTR's and claiming things they shouldn't.

Thanks for the info. So where does one get access to this "Nissan FAST" to verify the VIN of the GTR?

This has all been covered many times, guys...

http://www.skylinesaustralia.com/forums/Ni...Gtr-t86152.html

Thanks to you Kristian, I have made the corrections in my post.

Since you own a V-Spec II N1, you will defiantly know the differences!

:)

- http://www.skylinesaustralia.com/forums/in...t&p=5484121

Use this as a guide and it will give the new comers some idea of it all.

Hey mate. You may have to do another correction. I have a V Spec N1 R34 , Kristian has the V Spec II R34. V Spec don't have a carbon bonnet and also not sure about the V SpecII but mine doesn't get the clear coat over the paint.

If anybody wants a great reference book get NISSAN GT-R. Supercar , born to race by dennis Gorodji.

Sorry to correct your correction, my N1 brethren, but I suspect you'll find your bonnet was switched for a stock one - the V Spec N1s came with a clear coated CF bonnet without the NACA duct that the V Spec IIs got...a very rare bonnet indeed...

Hahah so true. I hear the N1's are going up in value, according to Kristian :D

Like any investment, you never truly know how good it is till the time comes to sell it :)

I was supposed to sell it when the value of the car equalled what we owed on the house, but that mark passed a good six months ago...lucky I control the finances lol

Thanks for correcting my correction, ha. Still not sure about the bonnet. It's definitely the bonnet that was on it when it had it's little accident. You can see where they spray painter cut it in with the guard, which by the way needs to be repainted. The guard has been repainted and is covered in tiny bubbles. probably some silicone or other impurity in the spray booth.

The best value 34 R is the one you can find in the nicest, cleanest body condition you can find within your budget.

Before finding mine I was absolutely astounded with how many had had serious repair damage, often poorly done. I go on to see these cars sold to guys who should know better, but so many guys must fall in love with a dog because it's the right colour, right wheels, right turbos whatever....... Thats why I can never understand any private guy wanting to buy one unseen out of japan. For that value car, I want to see and touch it!

mate drop a line regarding ur 34r as i cant dont have enaugh posts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...