Jump to content
SAU Community

Recommended Posts

hi all recently bought 1990 gtr awesome car but want some upgrades in coming months so decided to buy parts on ebay on monthly basis as bank said no to loan :(

im thinking of gtr s hks turbos as they direct bolt on and atm aiming for 11 sec car but if change my mind will they go into 10 sec bracket? same goes for 700cc injectors?

im thinking of low boost atm as cant afford to rebuild botom end and replace oil pump etc..

any1 selling power fc let me know thanks

Link to comment
https://www.sau.com.au/forums/topic/340097-32-gtr-turbo-upgrade/
Share on other sites

GTRS is too big - you really want to look at increasing capacity to use them, on a 2.6litre you would need to rebuild the engine to run enough boost to get anything out of them.

GTSS (Garrett -9's) will see you to the limits for an unopened engine. These will be ok with standard injectors and AFM's.

Not sure about drag times.

GTRS is too big - you really want to look at increasing capacity to use them, on a 2.6litre you would need to rebuild the engine to run enough boost to get anything out of them.

GTSS (Garrett -9's) will see you to the limits for an unopened engine. These will be ok with standard injectors and AFM's.

Not sure about drag times.

yeah mate but thats the thing i wana buy them now so i can use them now then even after when i get cash to rebuild engine rathar then get small turbo then change it after 6 mths again

hi all recently bought 1990 gtr awesome car but want some upgrades in coming months so decided to buy parts on ebay on monthly basis as bank said no to loan :blush:

im thinking of gtr s hks turbos as they direct bolt on and atm aiming for 11 sec car but if change my mind will they go into 10 sec bracket? same goes for 700cc injectors?

im thinking of low boost atm as cant afford to rebuild botom end and replace oil pump etc..

any1 selling power fc let me know thanks

what about Garrett GT2860R http://cgi.ebay.com.au/Garrett-GT2860R-GT-...=item1e5efef943

its bit embarasing to enter with gtr to run high 13s huh

Nothing like public humiliation to motivate spending and upgrading then. The drags in a manual are still technique dependant.

Edited by WHITE gtt

That ebay price is very steep. Pair of turbos + postage is $2,860 (couldn't tell if they were -5, -7 or -9)

By them from Kudos motorsports, he seems to have the best prices and best service in my opinion.

If your in sydney I have a pair of brand new in the box 2860-5's that I'll part with for a bit of a discount on new price.

You can run 11's on the factory turbos.

If you do not have a spare 20k, then FORGET buying GT-RS.

They are a 450rwkw+ turbo combination, which requires a myriad of parts to back them up.

but can stil use them in stock aplication for few months? on low boost with upgraded injectors and aftermarket ecu?

im beeing sucked by my mechanic into ems buti think haltech could be better then ems or apexi?

hi all recently bought 1990 gtr awesome car but want some upgrades in coming months so decided to buy parts on ebay on monthly basis as bank said no to loan ;)

im thinking of gtr s hks turbos as they direct bolt on and atm aiming for 11 sec car but if change my mind will they go into 10 sec bracket? same goes for 700cc injectors?

im thinking of low boost atm as cant afford to rebuild botom end and replace oil pump etc..

any1 selling power fc let me know thanks

is that u alex :ninja: the money u ll spend on 32 can get u 34 gtr :) haltech platinum has direct plug in i belive ...

Wait, you dont want lag but you want a pair of GTRS turbos??

Sure they will let the car run, but yeah, as Ash said, need massive amounts of headwork, careful cam selection and spin to 9500rpm etc etc, otherwise they are a dog of a turbo on a 2.6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...