Jump to content
SAU Community

Recommended Posts

Just curious on what everyone's opinion of the best P plate legal track car there is out there.

The criteria is:

1. Must be p-plate legal.

2. Must be affordable by your typical 18-21yo enthusiast. No S2000s, or track dedicated cars with trailers and separate daily drivers.

3. Must be a good car to actually learn in. No automatic cars, etc.

Modifications are allowed if they're reasonable and apart of the affordable budget (say 10-15k, bonus points for going cheap). Things I'm looking for are decent brakes, power, weight, handling, whether or not it has an LSD, etc.

I'm not actually looking to buy another car, I'm just bored and figured I try get some discussion going on the NA boards beyond which exhaust should I buy or how can I get more NA power.

Link to comment
https://www.sau.com.au/forums/topic/340222-best-p-plater-motorsport-car/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Toyota AE86 Sprinter with the 4age 16v.

RWD platform, light weight, high revving motor, good aftermarket support, use it for drift or circuit depending on setup. Cheap to maintain, cheap to repair, good street cred

Mr2's handle like ass, and not really something a novice could drive quick without going off the track backwards every 2nd lap.

Best bet would be MX5, AE86s require to much work to be really quick on a circuit, 944's are horridly expensive to maintain,

Early 1st Gen RX7's like to break gearboxes and diffs so would require expensive aftermarket gear to be reliable

NA S13 is another option, cheap as and no-one would care if you stuck it into a wall.

an Early Ex-tarmac rally escort with rego would be fun.

Mr2's handle like ass, and not really something a novice could drive quick without going off the track backwards every 2nd lap.

haha fair enough, I drove a TRD 4AGZE MR2 when i was on my P's (fair few years ago now), was a mad fun car just had to be really quick and confident on the wheel.

haha fair enough, I drove a TRD 4AGZE MR2 when i was on my P's (fair few years ago now), was a mad fun car just had to be really quick and confident on the wheel.

yeah I know what you mean, have a look at MR2 track day photos, 90% of the cars are covered in dirt and mud from going off the track, the few cars that aren't dirty weren't trying hard enough lol

R34 GT-V manual.

- Take out all seats

- Put some nice light weight wheels

- Heavy duty clutch

- Upgrade suspension

- High flow panel filter and cat

- External oil cooler

- Bigger radiator

- Thermo fans

- Catch can

- Light weight bonnet of some description

- Sticky tires

- Premium fluids

If budget permits

- Carbon driveshaft

- Light weight flywheel

- Slotted rotors

Trying to keep it legal with minimal mods.

Reasoning behind the R34

- Parts are readily available

- Lots of support from SAU

- Big brakes and LSD

- Ridgid body

- RB25DE NEO has reasonable torque and seems to rev out much faster (more responsive) than the older non NEO engines.

^^ Sounds like a list straight out of Gran Turismo

Hahaha.

Needs some stage 1, stage 2 etc etc

:)

On a serious note.

- Keeping it legitimately street legal means you have to keep stock ECU (no nistune or anything like that) therefore - minimal mods

- The trick to anything being tracked is:

- Reliability.

- Being able to keep the engine within the powerband.

- Good brakes.

- Limited slip diff.

My friend's foster father has an old Peugeot 205 for track duties - his mods:

- Sparco driver's seat with harness

- Rear seat removed.

- Front passenger seat is removable.

- Battery moved to the back.

- Stripped out interior. All that remains is the climate control panel and cheap single din radio with 2 front speakers

- Runs on stock wheels with Dunlop semi slicks

- 1/2 cage

- Slotted rotors at the front with stock rotors on the rear

- Stock brakes with premium pads all round

- Koni shocks

- Larger radiator with twin thermo fans

- High flow filter and extractors (some other zorst work to I think)

- Stock engine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...