Jump to content
SAU Community

Recommended Posts

Thanks for the heads up guys, I went down to Supergas for a winge today and ended up speaking to the sales manager on the phone while at the counter. He ended up giving me a 10.5m3 refill for $125, less than half what I was paying.

I don't have pics of the damaged manifolds, one I had to repair, and one I saw on a car, the crack was definitely down in the webbing but it could have started beside the weld and cracked further away as it made it's way around the pipe. I didn't get a good look at it as it was on the car. It was probably 2mm tube so very thin and light stainless. It would glow white hot on the dyno within a second or two of hitting boost. My point was, he had a GT42 mounted without a hanger or support, and a 4 inch exhaust with no hangers till the diff. Perhaps it would have lasted longer if the manifold could move around on the head a little and the turbo was supported.

Still need to make a inlet for the bov

Let me know what you guys think !

Looks good Angelo, just face the BOV return towards the compressor, cut on a 45 degree angle, and weld it in. It will take a while to die grind the hole, partly the reason I use alloy for my intakes as it's much easier to shape the holes in.

Good news on the gas mate! What kunce though slugging ya that much a bottle especially when it looks like your a regular customer who does a fair bit of welding ;)

Im doing some pipework on my dads GTR tomorrow so hopefully I can get some pics up afterwards :)

Thanks for the heads up guys, I went down to Supergas for a winge today and ended up speaking to the sales manager on the phone while at the counter. He ended up giving me a 10.5m3 refill for $125, less than half what I was paying.

I don't have pics of the damaged manifolds, one I had to repair, and one I saw on a car, the crack was definitely down in the webbing but it could have started beside the weld and cracked further away as it made it's way around the pipe. I didn't get a good look at it as it was on the car. It was probably 2mm tube so very thin and light stainless. It would glow white hot on the dyno within a second or two of hitting boost. My point was, he had a GT42 mounted without a hanger or support, and a 4 inch exhaust with no hangers till the diff. Perhaps it would have lasted longer if the manifold could move around on the head a little and the turbo was supported.

I have a couple of vices, and a set of small vice grip pointy pliers. None are big enough for 4 inch unfortunately, I need to find a larger vice or find another way to hold larger tube.

I am making this 4 inch intake atm, for a GTX35 in a 33. The VQ afm should be good for over 450wkw resolution in 4 inch tube by my calculations. To be tuned with a PFC. :)

post-63525-0-42753000-1379429933_thumb.jpg

post-63525-0-89247800-1379429990_thumb.jpg

The reason thin walled china manifolds crack is due to expansion, they would crack just as easily if purged imo. If the manifold flange is split and the turbo/exhaust weight is carried by a well designed bracket of some sort, the manifolds would probably last for years (on road cars at least.)

I only purge exhaust pipes when the die grinder can't get to the back of the weld, this isn't food grade exhaust I am working on, and at $300 a bottle of argon I'm not going to waste it back purging unless I need to. I have never had any dump pipes or exhaust returned from weld failure either, track cars included.

One thing i can say, I definitely prefer to weld thin wall (1mm or thinner) while back purging as I am much less likely to blow holes and can crank much more current in. No doubt it is stronger, but this isn't a structural item we are talking about. Perhaps you get better pricing on Argon through your work Mick?

My 2c ... chinese manifolds crack not due to absence of support or purging...its purely down to the fact that there isnt any penetration. I have only looked at 3-4 China manifolds but none of them had any penetration. Even my old Greddy manifold only had intermittent penetration. Purging of course helps ontrol peno without cauliflower so is related.

Looks excellent! However, couldn't you have rotated the housing to avoid having that elbow?

Looks excellent! However, couldn't you have rotated the housing to avoid having that elbow?

Thanks. There was a reason i did it like that an I can't remember why haha, possibly due tithe size of the housing and manifold position it may have hit ac lines and compressor or pwr steering lines not sure it was a while ago. It was just easier to do that, plenty of big turbos are positioned the same. And since I was doing it in lobster back why not show off the stainless work. Edited by r32gtrs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...