Jump to content
SAU Community

Recommended Posts

So there must be a few other video buffs out there in SAU. Here is a thread for us to share our work and discuss how to's.

I wanted to see if I could replicate an effect I saw on another video forum. That guy's budget and time investment were much much higher.

Best watched full screen IMO

Now post some video your proud of and discuss.

Link to comment
https://www.sau.com.au/forums/topic/340772-the-video-editing-effects-thread/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I've got the interest and software but no footage to play with. I probably could use my slr to record, but I don't have anything to record. I've done a bit of editing and some tutorials though.

Send me some random footage Eric, maybe you get me hooked

Hey guys, I'm happy to share some of my footage. I try to keep all of it. I've got track days, Texi's, cruises and show'n shine.

Also happy to share what I'm learning through trial and error.

Amazing how good something looks just shortening clips, blending transitions and whacking a sound track. I'm sure some folks can do event better.

I'd love to give it a go Eric, but to be honest at the moment i don't have the time. Too much photography wise. Maybe over the holidays, i will have a crack at filming some random stuff and getting used to Final Cut Pro :)

Argh, so much to re-learn!

  • 3 months later...

We were using 3 cameras. That allowed me to get 3 different angles at the same time. For most work two is plenty. I just advice taking the time to change the angles and try to get variety. The more Variety in your videos the better they will look when you edit it.

Otherwise, you just get these boring shots from the same angle and we get tired of looking at the same thing for too long.

I use corel videostudio X3. It isn't as fully featured as some of the other packages but offers a great amount of capability for the price range. It has up to 3 or 4 video tracks, multiple audio tracks, overlay, chromakey, etc etc. So far does everything I need. I also have some add-in packages that add more capability such as frosted edges, tilt-shift effects, etc.

Best advice is start out with just basics: Edit scenes, lay them together so it looks good, then add an audio track (music or something). Most of my quick editing I do that way.

The other best advice I can give is don't try to start out doing all kinds of fancy transitions and effects. Best effects are subtle and so that the viewer kind of doesn't realise they are there. 90% of my transition effects are A/B roll (one scene fades into the new scene) and fade to black transitions. I use fade to black between story board segments - like starting a new chapter. A/B is great to kind of just transition as a "time warp" softly moving quickly forward in time. Of course this is just rule of thumb, a lot of times I'll just throw those transitions together to make it look good - especially if the story board is just a jumble of scenes (like cruises, car shows, etc) where there is little story line.

As you get used to it, you'll start to find that you start to shoot your video differently. Once you realise you only use about 3-10 seconds of video at a time, you really start trying to find interesting ways to capture your footage (same as photography that way).

The other thing I really like about video is the ability to story board which doesn't translate in still photography as much. Although I do know that a few of the really good photographers on SAU can capture a story board in one still frame (e.g. composition of primary, secondary elements in scene).

I've been dabbling in editing for some time so hard for me to advise the best way to get started other than get in and start to give it a go. Best way to develop your own style is do what you like and find out for yourself what you don't think works well. When I got started simple A/B roll equipment was about 20k alone and you needed special sync equipment, etc. Now you have the same capability as a full production studio that would have cost hundreds of thousands of dollars for a few hundred on a computer. No one even uses the term "Non-linear editing" anymore cause it's all done that way.

I've yet to do a big production. I'm kind of planning one as my first "indi film" project, soon.

  • 1 month later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...