Jump to content
SAU Community

Wtborrow - Rb25 Standard Actuator And Air Box


Recommended Posts

Got reported to the EPA today, and though its not for a little while yet (letter is gonna be mailed to me) just gonna chase up some parts that i need

item 1 - stock RB25 actuator in good working condition. i'll need to borrow this for a few days and will return it asap after my inspection. dont want to buy as im just gonna revert to the cars current state post inspection.

item 2 - airbox w filter. dont need the snorkle as my airbox was lent to a user on here who then went awol with it. prob wont need this but safe to have anyway

please post in here, pm or sms on 0405736235

cheers

Basti

did they actually ping you for different actuator fitted or do you want to run std boost ?

if you have non-std actuatotor you could simply wire the gate open to make it run basically no boost

did they actually ping you for different actuator fitted or do you want to run std boost ?

if you have non-std actuatotor you could simply wire the gate open to make it run basically no boost

will epa pick up on that? Pettett picked up on the rerouted boost lines. just rekon its safer looking stock. will be swapped back out when i clear.

charles, maroondah hwy ringwood.

thanks for the replies guys. i'll get in touch when i get the letter

Niroj. Got actuator but it's still on the stock turbo. We can remove it for you if you like

PM me if you're selling stock turbo, interested in grabbing it off you.

yeah the vac lines is a dead obvious give away specially if they are brigth coloured vac lines etc

if its a std looking actuatgor and its not shiny and clean then you should be fine

ie if it looks clean it means youve been fiddling with it, cover it in oil and make it look dirty

i dont think they would be pick differetn actuator spring rate, how woudl they check it ? other than visual

yeah the vac lines is a dead obvious give away specially if they are brigth coloured vac lines etc

if its a std looking actuatgor and its not shiny and clean then you should be fine

ie if it looks clean it means youve been fiddling with it, cover it in oil and make it look dirty

i dont think they would be pick differetn actuator spring rate, how woudl they check it ? other than visual

the boost lines are the stock looking black rubber. easier to just go std for now

the nipple on rb20 actuator (i assume that's what you have Niroj) is in a different spot to rb25 one..

you'd be STIFF if you got done for that

hmm didnt know that

Sorry grant. I keep my stock parts in case of EPA. Don't like hunting stuff everytime I get done haha

Fair enough, worth asking anyway.

Lol harsh. I've had about 4-5 epas and about the same number of defects

GEEZZ!!! crazy boy...now for your sake i hope you dont get any troubles...but pretty sure looking at your car cops are forced to pull you over :) coz its so hot :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...